Bedienungsanleitung Onkyo TX-NR906 (Seite 55 von 150) (Englisch)

62439

Zoom out

Zoom in

Vorherige Seite

1/150

Nächste Seite

First Time Setup—Continued

If you connect your TV to the COMPONENT VIDEO

MONITOR OUT, set the “Monitor Out” setting to

“Analog” so that the onscreen setup menus are displayed

and composite video and S-Video sources are upcon-

verted and output by the COMPONENT VIDEO MON-

ITOR OUT.

If you connect your TV to the HDMI OUT MAIN or

HDMI OUT SUB, set the “Monitor Out” setting to

“HDMI Main” or “HDMI Sub”, respectively, so that the

onscreen setup menus are displayed and composite

video, S-Video, and component video sources are

upconverted and output by the HDMI OUT MAIN or

HDMI OUT SUB.

You can specify the output resolution for the HDMI out-

puts and COMPONENT VIDEO MONITOR OUT and

have the AV receiver upconvert the picture resolution as

necessary to match the resolution supported by your TV.

Monitor Out Setup

Press the [RECEIVER] button,

followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make

sure the appropriate external input is

selected on your TV.

INPUT SELECTOR

LISTENING MODE

ON STANDBY

DISPLAY MUTING

DIMMER

CDR/MD/DOCK

SAT

TAPE/AMP

SLEEP

MACRO

REMOTE MODE

SUBTITLE

AUDIO

REPEAT

PLAY MODE

---

10 11 12

TV CH

TV VOL

PLAYLIST

RANDOM

DVD

AUX1 AUX

GAME/TV

CBL/SATVCR/DVR

D. TUN

TUNER

TAPE

PHONO

REC

ENTER

SURR

DIRECT

THX

PURE A

STEREO

ALL ST

VOL

DISC

ALBUM

VCR

CABLE

NET/USB

DVD

RECEIVER

123

ZONE

INPUT

+10

CLEAR

123

456

789

NET/USB

SP A SP B

2, 3

2–

1, 6

Use the Up and Down [q]/[w] but-

tons to select “1. Input/Output

Assign”, and then press

[ENTER].

The “Input/Output Assign” menu

appears.

Use the Up and Down [q]/[w] but-

tons to select “1. Monitor Out”,

and then press [ENTER].

The “Monitor Out” menu appears.

Use the Up and Down [q]/[w] but-

tons to select “Monitor Out”, and

use the Left and Right [e]/[r]

buttons to select:

Analog:

Select this if your TV is connected

to the COMPONENT VIDEO

MONITOR OUT, S MONITOR

OUT, or V MONITOR OUT.

HDMI Main:

Select this if your TV is connected

to the HDMI OUT MAIN.

HDMI Sub:

Select this if your TV is connected

to the HDMI OUT SUB.

Note:

When “HDMI Main” or “HDMI Sub”

is selected, the onscreen setup menus

are output by only the HDMI outputs.

If you’re not using the HDMI outputs

and select “HDMI Main” or “HDMI

Sub” by mistake and the menus dis-

appear, press the AV receiver’s

[HDMI OUT] button so that “Moni-

tor Out: Analog” appears on the dis-

play.

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3. Component Video Input

4. Digital Audio Input

5. Analog Audio Input

1–1. Monitor Out

Monitor Out

Resolution

Brightness

Contrast

Hue

Saturation

Analog

Through

MOVE VALUE RETURN

RETURN

EXIT

SETUP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR906 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR906

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info