Bedienungsanleitung Onkyo TX-NR929 (Seite 31 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Turning On & Basic Operations

En-31

To achieve a wireless network connection, it is

necessary to perform the wireless LAN setup. The

setup can be done either automatically or manually.

You use your AV receiver as a wireless client

(wireless terminal) and connect it to a PC or to the

Internet.

Automatic wireless LAN setup

Performing Wireless LAN Setup

A wireless LAN (WLAN) is a local area network that

relies on wireless communication.

To achieve a wireless network connection, you will

need the following component:

■ Access point

Also known as the base station, it links your AV

receiver (wireless client) with a PC or network.

Access points fall into two categories: the bridge

type that only performs data relay in a local area

network, or the router type that has a built-in router

functionality.

Press RECEIVER followed by HOME.

Use e/r or q/w to select “Setup”, and then

press ENTER.

Use q/w to select “Hardware Setup”, and then

press ENTER.

Use q/w to select “Network”, and then press

ENTER.

Use q/w to select “Network Connection”, and

e/r to select “Wireless”, and then press

ENTER (➔ page 80).

The “Wireless Setup” menu is displayed on

screen.

Tip

• The same setting is available even if “Wireless” is

selected in “Network Connection” in initial setup

(➔ page 27).

Press q/w to select (North American models)

“Push Button Configuration (Other

Routers)”

/(excluding North American

models) “Push Button Configuration (Select

from Router)”, and press ENTER.

The method to make settings by “Push Button

Configuration” is displayed, providing the

following two options:

Tip

(North American models) To connect to Linksys

E/EA Router, select “Push Button Configuration

(Linksys E/EA Router)” and make settings

following the instructions on the screen.

■ Push Button method

1. Use q/w to select “Push Button” and then

press ENTER.

2. Press the WPS button on your Access Point

device.

Tip

• How long the WPS button should be pressed differs

depending on the type of Access Point device. Refer

to the instruction manual provided with your Access

Point device for operations.

■ PIN code method

1. Use q/w to select “PIN Code” and then press

ENTER.

An 8-digit PIN code is displayed. The PIN

code is displayed scrolling on the AV

receiver’s display.

2. Input the provided code in your Access Point.

For information on the registration process,

please refer to the instruction manual

provided with your Access Point device.

Press ENTER to confirm.

Connection to your Access Point starts and Wi-Fi

indicator flashes. After the connection to your

Access Point is completed, Wi-Fi indicator lights

and the connection status is displayed on the

screen.

This completes the wireless LAN setup.

You can review your setup with the “Status”

option on the “Wireless Setup” menu.

Note

• If Wi-Fi indicator doesn’t light, the connection to your

Access Point is not done successfully. Configure this

setting again (➔ page 99).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info