Bedienungsanleitung Onkyo TX-NR929 (Seite 36 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Playback

En-36

Tip

• The AV receiver may not work as normal depending on the

circumstance even though the AV receiver is placed within

the 15 meters range. In such cases, get the Bluetooth-

enabled device closer to the AV receiver and retry the

operation.

• When disconnecting on your Bluetooth-enabled device,

BLUETOOTH indicator on the AV receiver will go off.

• If there is no sound output even after the pairing is done

successfully, consult the instruction manual of the

Bluetooth-enabled device, and then select the model name

of the AV receiver as the audio output device.

• While connected to a Bluetooth-enabled device, the AV

receiver cannot be detected and a connection cannot be

established from another Bluetooth-enabled device.

• If you cannot connect with a paired Bluetooth-enabled

device, perform the pairing operation between the AV

receiver and the Bluetooth-enabled device again.

Note

• Due to the characteristic of Bluetooth wireless technology,

the sound played on the AV receiver may slightly delay from

the sound played on the Bluetooth-enabled device.

Tip

• The on-screen information appears only on a TV that is

connected to HDMI outputs.

This section explains how to play music files from a

USB device (e.g., USB flash drives and MP3 players).

See also:

• “Network/USB Features” (➔ page 108).

Note

• While the message “Connecting...” appears on the AV

receiver’s display, do not disconnect the USB cable

supplied with the USB device from the USB port.

You need to connect the AV receiver to your home

network (➔ pages 20, 31).

Tip

• The on-screen information appears only on a TV that is

connected to HDMI outputs.

TuneIn is a new radio service which offers the music,

sports and news all over the world.

Over 70,000 radio stations and 2 million on-demand

programs are registered, and you can easily enjoy

them by selecting stations or programs of your

choice. TuneIn is preprogrammed on the AV receiver.

During this period (about 2 minutes), you can

operate the Bluetooth-enabled device to pair

with the AV receiver.

Note

• When establishing a connection with the AV receiver,

select the profile (A2DP, AVRCP) at the Bluetooth-

enabled device. If the Bluetooth-enabled device does

not support the AVRCP profile, you cannot perform

playback or other operations with the AV receiver.

Tip

• For details on the Bluetooth connection, refer to the

instruction manual of the Bluetooth-enabled device.

Once the AV receiver is detected and the

model name of the AV receiver appears on the

display of your Bluetooth-enabled device,

select the model name.

When a Bluetooth connection is established

successfully, BLUETOOTH indicator will light.

Tip

• The model name appeared on the display of your

Bluetooth-enabled device is “Onkyo TX-NR929”.

The model name displayed on your Bluetooth-enabled

device can be changed in Web Setup (➔ page 38).

If passkey

is required on the display of the

Bluetooth-enabled device, enter “0000”.

The AV receiver only supports numerical

passkey up to 4 digits.

* Passkey may be called “Passcode”, “PIN code”, “PIN

number” or “Password”.

Play back the desired music on the Bluetooth-

enabled device.

The audio is output from the AV receiver.

Playing a USB Device

Press USB to select the “USB” input.

Plug your USB device into the AV receiver’s

USB port.

The USB indicator lights. It will flash if the AV

receiver cannot read the USB device.

Press ENTER.

A list of the device’s contents appears. To open a

folder, use q/w to select it, and then press

ENTER.

Use q/w to select a music file, and press

ENTER or 1 to start playback.

Listening to TuneIn

Press NET.

The network service screen appears, and the

NET indicator lights. If it flashes, the AV receiver

is not connected to the network correctly. If wired

LAN connection is selected, verify that the

Ethernet cable is firmly connected to the AV

receiver. If wireless LAN connection is selected,

verify that the Wi-Fi indicator lights.

Tip

• The same operation can be done by selecting

“Network Service” in the Home menu.

Use q/w/e/r to select “TuneIn” and then

press ENTER.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info