Bedienungsanleitung Onkyo TX-NR929 (Seite 43 von 160) (Englisch)

517568

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Playback

En-43

■ Selecting Presets

■ Deleting Presets

Using RDS (excluding North American

models)

When tuned into an RDS station, the RDS indicator

lights.

When the station is broadcasting text information, the

text can be displayed.

■ What is RDS?

RDS stands for Radio Data System and is a method

of transmitting data in FM radio signals. It was

developed by the European Broadcasting Union

(EBU) and is available in most European countries.

Many FM stations use it these days. In addition to

displaying text information, RDS can also help you

find radio stations by type (e.g., news, sport, rock,

etc.).

The AV receiver supports four types of RDS

information:

PS (Program Service)

When tuned to an RDS station that’s broadcasting PS

information, the station’s name will be displayed.

Pressing DISPLAY will display the frequency for 3

seconds.

RT (Radio Text)

When tuned to an RDS station that’s broadcasting

text information, the text will be shown on the AV

receiver’s display.

PTY (Program Type)

This allows you to search for RDS radio stations by

type.

TP (Traffic Program)

This allows you to search for RDS radio stations that

broadcast traffic information (➔ page 44).

Note

• RDS works only in areas where RDS broadcasts are

available.

• In some cases, the text characters displayed on the AV

receiver may not be identical to those broadcast by the

radio station. Also, unexpected characters may be

displayed when unsupported characters are received. This

is not a malfunction.

• If the signal from an RDS station is weak, RDS data may be

displayed intermittently or not at all.

■ Displaying Radio Text (RT)

■ Finding Stations by Type (PTY)

You can search for radio stations by type.

Press MEMORY again to store the station or

channel.

The station or channel is stored and the preset

number stops flashing.

Repeat this procedure for all of your favorite

AM/FM radio stations.

To select a preset, use PRESET e/r on the AV

receiver, or the remote controller’s CH +/–.

Tip

• You can also use the remote controller’s number

buttons to select a preset directly.

Select the preset that you want to delete.

See the previous section.

While holding down MEMORY, press TUNING

MODE.

The preset is deleted and its number disappears

from the AV receiver’s display.

Press RT/PTY/TP once.

The RT information scrolls across the AV

receiver’s display.

Note

• The message “Waiting” may appear while the AV

receiver waits for the RT information.

• If the message “No Text Data” appears, no RT

information is available.

Press RT/PTY/TP twice.

The current program type appears on the AV

receiver’s display.

Use PRESET e/r to select the type of

program you want.

See the table shown later in this chapter.

To start the search, press the enter button.

The AV receiver searches until it finds a station of

the type you specified, at which point it stops

briefly before continuing with the search.

When a station you want to listen to is found,

press the enter button.

If no stations are found, the message “Not

Found” appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info