Bedienungsanleitung Onkyo TX-NR929 (Seite 104 von 160) (Englisch)

517568

104

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Appendix

En-104

Operating

procedure

(➔ page 61)

Firmware Update

To update the firmware of the AV receiver, you can

choose from the following two methods: update via

network, or update via USB storage. Choose the one

that best suits your environment. Before proceeding

with the update, please read the corresponding

explanations carefully.

■ Update via network

You need a Internet connection to update the

firmware.

■ Update via USB storage (➔ page 105)

Please prepare a USB storage device such as a USB

flash memory stick. You need at least 50 MB of

available space to update the firmware.

Note

• Check the network connection before updating.

• Do not touch any cable or device connected to the AV

receiver during the update process.

• Do not attempt to access the AV receiver from your PC

while it is being updated.

• Do not shutdown the power of the AV receiver while it is

being updated.

• The storage media in the USB card reader may not work.

• If the USB device is partitioned, each section will be treated

as an independent device.

• If the USB device contains a lot of data, the AV receiver

may take a while to read it.

• Operation is not guaranteed for all USB devices, which

includes the ability to power them.

• Onkyo takes no responsibility whatsoever for the loss or

damage of data resulting from the use of a USB device with

the AV receiver. Onkyo recommends that you back up your

important music files beforehand.

• If you connect a USB hard disk drive to the USB port,

Onkyo recommends that you use its AC adapter to power it.

• USB hubs and USB devices with hub functions are not

supported. Do not connect your USB device via a USB hub.

• USB devices with security functions are not supported.

See the Onkyo web site for latest information.

The AV receiver allows you to update the firmware using

network connection.

Note

• Make sure your AV receiver and TV are turned on and the

AV receiver is connected to the Internet.

• Never unplug or turn off the AV receiver while it is being

updated.

• Never plug or unplug an HDMI or Ethernet cable during the

update process.

• Do not attempt to access the AV receiver from your PC

while it is being updated.

• Never unplug the power cord during the update process.

• It takes up to 20 minutes to complete the firmware update.

• The AV receiver will retain all your settings after the update

is finished.

Before Starting

• Set the “HDMI CEC (RIHD)” setting to “Off”

(➔ page 78).

• Turn off the controller device connected via RS232

and network.

• Turn off Multi Zone if this function is present.

• Stop playback of contents from Internet Radio, USB

or servers, etc.

Update Procedure

Limitation of liability

The program and accompanying online

documentation are furnished to you for use at your

own risk. Onkyo will not be liable and you will have

no remedy for damages for any claim of any kind

whatsoever concerning your use of the program or

the accompanying online documentation,

regardless of legal theory, and whether arising in

tort or contract. In no event will Onkyo be liable to

you or any third party for any special, indirect,

incidental, or consequential damages of any kind,

including, but not limited to, compensation,

reimbursement or damages on account of the loss

of present or prospective profits, loss of data, or for

any other reason whatsoever.

Updating the Firmware via Network

Press RECEIVER followed by HOME on the

remote controller.

The Home menu appears on the TV screen.

Select “Firmware Update” and press ENTER.

Note that the “Firmware Update” option will be

grayed out for a short while after the AV receiver

is turned on. Please wait until it becomes

operable.

Select “Update via NET” and press ENTER.

Note that this option will not be available if there

is no firmware file newer than the currently

installed version. If the AV receiver is not

connected to the internet, “Update via NET” is

not displayed.

Select “Update” and press ENTER.

The update process will begin.

During the update process, the on-screen display

may disappear depending on the updated

program. When this occurs, you can still view the

update progress on the AV receiver’s display.

The on-screen display will reappear after the

update is complete, and upon turning the AV

receiver off and on again.

The message “Completed!” appears on the AV

receiver’s display, indicating that the update

has been completed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-NR929 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-NR929

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info