Bedienungsanleitung Onkyo TX-RZ730 (Seite 163 von 174) (Englisch)

686253

163

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

163

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 Video

• Conrm that the connection between the output jack on the connected device and the input jack on this unit is correct.

• Make sure that none of the connecting cables are bent, twisted, or damaged.

• When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance

between TV antenna cable and cables of the unit.

• Check the switching of the input screen on the monitor side such as a TV.

Check the following if the problem persists after you have conrmed the above.

❏ No image appears.

• Change the input selector on this unit to the position of the terminal to which the player is connected.

• If the listening mode is Pure Audio (for compatible models only), the video signals input from jacks other than the HDMI IN jack are not output.

❏ No image from a device connected to HDMI IN jack

• To display video from the connected player on the TV while the unit is in standby, you need to enable "5. Hardware" - "HDMI" - "HDMI Standby

Through" in the Setup menu. For details of the HDMI Standby Through function, refer to "Setup Menu" - "5. Hardware" - "■ 1. HDMI".

• To output video to a TV connected to the HDMI OUT SUB jack (for compatible models only), press Q on the remote controller to display "Quick

Menu", and select "Other" - "HDMI Out". Then, select the HDMI OUT jack for output.

• Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not

support the resolution of the video input from the player. Change the setting on the player.

• Normal operation with an HDMI-DVI adapter is not guaranteed. In addition, video signals output from a PC are not guaranteed.

( p140)

❏ Images icker

• The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable,

change the output resolution on the player. Also this may be solved by changing the screen mode on the TV.

❏ Video and audio are out of synch

• Depending on the settings on your TV and connection environment, the video may be behind the audio. Press Q on the remote controller to

display "Quick Menu", select "Other" - "A/V Sync", and make the adjustment.

( p147)

 Linked operation

❏ HDMI linked operation does not work with CEC-compliant devices, such as a TV

• In the Setup menu of the unit, set "5. Hardware" - "HDMI" - "HDMI CEC" to "On".

• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.

( p140)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-RZ730 Seite 163

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-RZ730

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info