Bedienungsanleitung Onkyo TX-RZ800 (Seite 101 von 142) (Englisch)

601863

101

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

Firmware Update

En-65

 If an Error Message is Displayed

When an error occurs, "*-** Error!" is displayed on the unit.

("*" represents an alphanumeric character.) Check the

following:

Error Code

● *-01, *-10:

Ethernet cable not found. Connect the Ethernet cable

properly.

● *-02, *-03, *-04, *-05, *-06, *-11, *-13, *-14, *-16, *-17,

*-18, *-20, *-21:

Internet connection error. Check the following:

– Whether the router is turned on

– Whether this unit and router are connected to the

network

Try to disconnect and then connect again the power

to the unit and router. This may solve the problem. If

you are still unable to connect to the Internet, the DNS

server or proxy server may be temporarily down. Check

the service status with your ISP provider.

● Others:

First disconnect then reconnect the AC power cord, and

then retry from the beginning.

Updating the Firmware via USB

Before Starting:

● Prepare a 64MB or larger USB storage device. This unit

supports FAT16 and FAT32 file system formats for USB

storage devices.

– Media inserted in a USB card reader may not be

used for this function.

– USB storage devices with security function are not

supported.

– USB hubs and USB devices with hub function are not

supported. Do not connect these devices to the unit.

● Delete any data stored on the USB storage device.

● Turn off the controller component (PC etc.) connected to

the network.

● Stop any playing Internet radio, USB storage device, or

server content.

● If the multi-zone function is active, turn it off.

● If "HDMI CEC (RIHD)" is set to "On", set it to "Off"

(default value).

– After pressing RCV on the remote controller, press

SETUP. Then, after selecting "6. Hardware" - "HDMI"

and pressing ENTER, select "HDMI CEC (RIHD)" to

select "Off".

 Some USB storage devices may take long to load, may not be loaded

correctly, or may not be correctly fed depending on the device or their

content.

 Onkyo will not be liable whatsoever for any loss or damage of data, or

storage failure arising from the use of the USB storage device with this

AV receiver. Thank you for your understanding.

 The description may differ from the on-screen display but that will not

change the way to operate or the function.

 Update

1. Connect the USB storage device to your PC.

2. Download the firmware file from the Onkyo website to

your PC and unzip.

Firmware files are named in the following way:

ONKAVR****_************.zip

Unzip the file on your PC. The number of unzipped files

and folders varies depending on the model.

3. Copy all unzipped files and folders to the root folder of

the USB storage device.

● Make sure to copy the unzipped files.

4. Connect the USB storage device to the USB port of the

unit.

● If you connect a USB hard disk drive to the USB

port of the unit, we recommend that you use its AC

adapter to power it.

● If the USB storage device has been partitioned, each

section will be treated as an independent device.

5. After pressing RCV on the remote controller, press

SETUP.

The Setup menu is displayed on the TV screen.

1. Input/Output Assign

2. Speaker

3. Audio Adjust

4. Source

5. Listening Mode Preset

6. Hardware

7. Remote Controller

8. Miscellaneous

Setup

1. TV Out

2. HDMI Input

3. Video Input

4. Digital Audio Input

6. With the cursors, select "8. Miscellaneous" - "Firmware

Update" - "Update via USB", and then press ENTER.

1. Input/Output Assign

2. Speaker

3. Audio Adjust

4. Source

5. Listening Mode Preset

6. Hardware

7. Remote Controller

8. Miscellaneous

Setup

1. Firmware Update

2. Initial Setup

3. Lock

● If "Firmware Update" is grayed out and cannot be

selected, wait for a while until it starts up.

● You will not be able to select "Update via USB" if

there is nothing to update.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-RZ800 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-RZ800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info