686251
191
Zoom out
Zoom in
Vorherige Seite
1/202
Nächste Seite
191
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Network function
If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up.
When the NET indicator is blinking, this unit is not properly connected to the home network.
Unplug and plug the power cords of this unit and the router, or restart the router.
If the desired router is not displayed in the access point list, it may be set to hide SSID, or the ANY connection may be off. Change the setting and
try again.
Check the following if the problem persists after you have conrmed the above.
Cannot access the Internet radio
In the case the service provider has terminated the service, the network service or contents may not be used on this unit.
Check if your modem and router are properly connected, and they are both turned on.
Check if the LAN side port on the router is properly connected to this unit.
Check if connecting to Internet from other devices is possible. If it is not possible, turn off all devices connected to the network, wait for a while,
and then turn on the devices again.
Depending on ISP, setting the proxy server is required.
Check if the router and modem you are using are supported by your ISP.
Cannot access the network server
This unit needs to be connected to the same router as the network server.
This unit supports the Windows Media
®
Player 11 or 12 network servers, or NASes that support the home network function.
Windows Media
®
Player may require some settings. Refer to "Playing back les on a PC and NAS (Music Server)".
When using a PC, only the music les registered in the library of Windows Media
®
Player can be played.
( p99)
Sound is interrupted when playing music les on the network server
Check if the network server meets the requirements for operation.
When the PC is serving as the network server, quit application software other than the server software (Windows Media
®
Player 12, etc.).
If the PC is downloading or copying large les, the playback sound may be interrupted.
191

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

onkyo-tx-rz840

Suche zurücksetzen

  • Moechte frontlautsprecher ueber 2kanal versterker nutzen Eingereicht am 28-1-2021 15:21

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Onkyo TX-RZ840 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Onkyo TX-RZ840

Onkyo TX-RZ840 Bedienungsanleitung - Deutsch - 204 seiten

Onkyo TX-RZ840 Bedienungsanleitung - Holländisch - 202 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info