Bedienungsanleitung Onkyo TX-SR 705 (Seite 111 von 116) (Englisch)

61604

111

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

111

Troubleshooting—Continued

The surround speakers produce no sound

• When the Stereo or Mono listening mode is selected,

the surround speakers produce no sound (page 71).

• Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

• Make sure the speakers are configured correctly

(page 77).

The center speaker produces no sound

• When the Mono or Stereo listening mode is selected,

the center speaker produces no sound (page 71).

• Make sure the speakers are configured correctly

(page 77).

The surround back speakers produce no sound

• The surround back speakers are not used with all listen-

ing modes. Select another listening mode (page 71).

• Not much sound may be produced by the surround

back speakers with some sources.

• Make sure the speakers are configured correctly

(page 77).

The subwoofer produces no sound

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces

no sound.

• Make sure the speakers are configured correctly

(page 77).

There’s no sound with a certain signal format

• Check the digital audio output setting on the con-

nected device. On some game consoles, such as those

that support DVD, the default setting is off.

• With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (pages 67-70).

Can’t select the DTS-ES Discrete/Matrix listen-

ing modes

• These modes cannot be selected when no surround

back speakers are connected, or the Zone 2 speakers

are being used.

• You can not always select all of the listening modes,

depending on the number of the speaker connected

(pages 67-70).

Can’t get 6.1/7.1 playback

• If no surround back speakers are connected, or the

Zone 2 speakers are being used, 6.1/7.1 playback is

not possible.

• You can not always select all of the listening modes,

depending on the number of the speakers connected

(pages 67-70).

The volume cannot be set to +18 dB (99)

• Check to see if a maximum volume has been set

(page 92).

• After the Automatic Speaker Setup function has been

run, or the volume level of each individual speaker has

been adjusted (page 81), the maximum volume may

be reduced.

Noise can be heard

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work

• Make sure the source material is Dolby Digital, Dolby

Digital Plus, and Dolby TrueHD (page 75).

The DVD analog multichannel input doesn’t

work

• Check the DVD analog multichannel input connec-

tions (page 31).

• To select the DVD analog multichannel input, press

the [MULTI CH] input selector button.

• Check the audio output settings on your DVD player.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver/AV amplifier remains in

DTS listening mode and the DTS indicator remains

on. This is to prevent noise when you use the pause,

fast forward, or fast reverse function on your player. If

you switch your player from DTS to PCM, because

the AV receiver/AV amplifier does not switch formats

immediately, you may not hear any sound, in which

case you should stop your player for about three sec-

onds, and then resume playback.

• With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver/AV amplifier. This is usually because the DTS

bitstream has been processed (e.g., output level, sam-

pling rate, or frequency response changed) and the AV

receiver/AV amplifier doesn’t recognize it as a genuine

DTS signal. In such cases, you may hear noise.

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

The beginning of audio received by an HDMI IN

can’t be heard

• Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio sig-

nals, audio output may not start immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR 705 Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR 705

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info