Bedienungsanleitung Onkyo TX-SR252 (Seite 24 von 35) (Englisch)

645302

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Listening to your system

Setting the Audio options

There are a number of additional sound settings you can

make using the AUDIO ADJUST menu. The defaults, if not

stated, are listed in bold.

Important

•

Note that if a setting doesn’t appear in the AUDIO ADJUST

menu, it is unavailable due to the current source, settings

and status of the receiver.

Press

AUDIO

button.

Use

/

to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

Use

/

to set it as necessary.

See the table below for the options available for each

setting.

Press

RETURN

to confirm and exit the menu.

a. You can change the Music Optimizer feature at any time by

using

M.OPT

button.

b. The default setting when the USB input is selected is ON.

c. This setting works only with dual mono encoded Dolby Digital

and DTS soundtracks.

d. The initial set AUTO is only available for Dolby TrueHD signals.

Select MAX or MID for signals other than Dolby TrueHD.

e. This feature is only available when the connected display

supports the automatic audio/video synchronizing capability

(‘lip-sync’) for HDMI. If you find the automatically set delay time

unsuitable, set A.DLY to OFF and adjust the delay time

manually. For more details about the lip-sync feature of your

display, contact the manufacturer directly.

f. Only available with 2-channel sources in DOLBY PLII MUSIC

mode.

g. Only when listening to 2-channel sources in NEO:6 CINEMA

and NEO:6 MUSIC mode.

Setting/What it does Option(s)

A/V SYNC

Some monitors have a slight delay when

showing video, so the soundtrack will be

slightly out of sync with the picture. By adding

a bit of delay, you can adjust the sound to

match the presentation of the video.

0 ms to 500 ms

(1 step : 5 ms)

Default: 0

M.OPT (Music Optimizer)

When audio data is removed during the

compression process, sound quality often

suffers from an uneven sound image. The

Music Optimizer feature employs new DSP

technology that helps bring CD quality sound

back to compressed 2-channel audio by

restoring sound pressure and smoothing

jagged artifacts left over after compression.

OFF

AUDIO

AUDIOAUDIO

AUDIO

SURR DSP

DUAL MONO

Specifies how dual mono encoded Dolby

Digital soundtracks should be played.

CH1 – Channel 1

is heard only

CH2 – Channel 2

is heard only

CH1 CH2 – Both

channels heard

from front

speakers

F.PCM (Fixed PCM)

This is useful if you find there is a slight delay

before OFF recognizes the PCM signal on a

CD, for instance.

When ON is selected, noise may be output

during playback of non-PCM sources. Please

select another input signal if this is a problem.

OFF

LATE NIGHT

Adjusts the level of dynamic range for movie

soundtracks optimized for Dolby Digital, DTS,

Dolby Digital Plus, Dolby TrueHD, DTS-HD

and DTS-HD Master Audio (you may need to

use this feature when listening to surround

sound at low volumes).

AUTO

OFF

MID

MAX

HDMI (HDMI Audio)

Specifies the routing of the HDMI audio signal

out of this receiver (AMP) or through to a TV

(THRU). When THRU is selected, no sound is

output from this receiver.

AMP

THRU

A.DLY (Auto Delay)

This feature automatically corrects the audio-

to-video delay between components

connected with an HDMI cable. The audio

delay time is set depending on the operational

status of the display connected with an HDMI

cable. The video delay time is automatically

adjusted according to the audio delay time.

OFF

C.WIDTH (Center Width)

(Applicable only when using a center speaker)

Spreads the center channel between the front

right and left speakers, making it sound wider

(higher settings) or narrower (lower settings).

0 to 7

Default: 3

Setting/What it does Option(s)

DIMEN (Dimension)

Adjusts the surround sound balance from

front to back, making the sound more distant

(minus settings), or more forward (positive

settings).

–3 to +3

Default: 0

PNRM. (Panorama)

Extends the front stereo image to include

surround speakers for a ‘wraparound’ effect.

OFF

C.IMG (Center Image)

(Applicable only when using a center speaker)

Adjust the center image to create a wider

stereo effect with vocals. Adjust the effect

from 0 (all center channel sent to front right

and left speakers) to 10 (center channel sent

to the center speaker only).

0 to 10

Default: 3

(NEO:6 MUSIC),

10 (NEO:6

CINEMA)

Setting/What it does Option(s)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR252 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR252

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info