Bedienungsanleitung Onkyo TX-SR307 (Seite 14 von 72) (Englisch)

645326

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Connecting the AV Receiver

Speaker Configuration

For the best surround-sound experience, you should

connect five speakers and a powered subwoofer.

The following table shows which channels you should

use based on the number of speakers you have.

No matter how many speakers you use, a powered

subwoofer is recommended for a powerful and solid

bass.

To get the best from your surround-sound system, you

must set the speaker settings. You can do this

automatically (see page 33) or manually (see page 54).

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver’s PRE

OUT: SUBWOOFER to the input on your powered

subwoofer. If your subwoofer is unpowered and you’re

using an external amplifier, connect the PRE OUT:

SUBWOOFER to the amp’s input.

Attaching the Speaker Labels

The AV receiver’s positive (+) speaker terminals are

color-coded for ease of identification. (The negative (–)

speaker terminals are all black.)

The supplied speaker labels are color-coded and you

should attach them to the positive (+) side of each

speaker cable in accordance with the above table. All

you need to do then is to match the color of each label to

the corresponding speaker terminal.

For North American model

• If you are using banana plugs, tighten the speaker

terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center

hole of the speaker terminal.

Speaker Connection Precautions

Read the following before connecting your speakers:

• You can connect speakers with an impedance of

6 ohms or higher. If you use speakers with a lower

impedance, and use the amplifier at high volume

levels for a long period of time, the built-in protection

circuit may be activated.

• Disconnect the power cord from the wall outlet before

making any connections.

• Read the instructions supplied with your speakers.

• Pay close attention to speaker wiring polarity. Connect

positive (+) terminals to only positive (+) terminals,

and negative (–) terminals to only negative (–)

terminals. If you get them the wrong way around, the

sound will be out of phase and will sound unnatural.

• Unnecessarily long or very thin speaker cables may

affect the sound quality and should be avoided.

• Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

• Don’t connect more than one cable to each speaker

terminal. Doing so may damage the AV receiver.

• Don’t connect a speaker to several terminals.

Connecting Your Speakers

Number of speakers: 2 3 4 5

Front left ✓✓✓✓

Front right ✓✓✓✓

Center ✓✓

Surround left ✓✓

Surround right ✓✓

Speaker Color

Front left White

Front right Red

Center Green

Surround left Blue

Surround right Gray

LINE INPUT

Powered

subwoofer

FRONT SPEAKERS A OTHERS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR307 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR307

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info