Bedienungsanleitung Onkyo TX-SR307 (Seite 55 von 72) (Englisch)

645326

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Advanced Setup—Continued

Crossover (Crossover Frequency)

This setting is set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function

(see page 33).

This setting only applies to the speakers that you specified as “Small” in the “3. Sp Config” on page 54.

To get the best bass performance from your speaker system, you need to set the crossover frequency according

to the size and frequency response of your speakers.

Use the diameter of the smallest speaker in your system when choosing the crossover frequency.

Speaker cone diameter Crossover frequency

Over 8 in. (20 cm)

40/50/60Hz*

6-1/2 to 8 in. (16–20 cm) 80Hz

5-1/4 to 6-1/2 in. (13–16 cm) 100Hz

3-1/2 to 5-1/4 in. (9–13 cm) 120Hz

Under 3-1/2 in. (9 cm) 150 (default) /200Hz*

* Choose the setting suitable for the speaker.

Notes:

• For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and

set accordingly.

• Choose a higher crossover frequency if you want more sound from your subwoofer.

Double Bass

This setting is not set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function

(see page 33).

With the Double Bass function, you can boost bass output by feeding bass sounds from the front left, right, and

center to the subwoofer. This function can be set only if the “Subwoofer” setting is set to “Yes”, and the “Front”

setting is set to “Large” in the “3. Sp Config” on page 54.

On: Double Bass function on. Bass from the front left and right channels is also fed to the

subwoofer (default).

Off: Double Bass function off.

4. Sp Distance (Speaker Distance)

These settings are set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function (see page 33).

With these settings, you can specify the distance from each speaker to the listening position.

Measure and make a note of the distance from each speaker to the listening position.

Notes:

• Speakers that you set to “No” or “None” in the “3. Sp Config” (page 54) cannot be selected.

• The speaker distance setting cannot be changed while a pair of headphones is connected, or speaker set B is on.

• The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example,

if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5

and 7.5 m).

• The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example,

if the Left distance is set to 20 ft. (6 m), the SurrRight and SurrLeft distances can be set between 5 and 25 ft. (1.5

and 7.5 m).

Unit feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

Front, Center, SurrRight, SurrLeft, Subwoofer

Specify the distance from the each speaker to your listening position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR307 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR307

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info