Bedienungsanleitung Onkyo TX-SR333 (Seite 8 von 20) (Englisch)

549876

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Step 2:

Setting Up

Move the cursor with

buttons and set the distance

from each speaker to the listening position. Press HOME to

save the changed setting and close the menu screen.

r This setting cannot be changed if headphones are

connected or audio is output from the speakers of the TV.

r The distance of speakers cannot be changed if "No" or

"None" is set for them in "Sp Config".

Adjusting volume level of speakers

After pressing RCV, press HOME on the remote

controller.

With the cursor, select "Setup", and press ENTER.

Select "7. Level Cal" with the cursor, and press

ENTER.

Move the cursor with

buttons and change the volume

level of each speaker. A test tone will be output each time

you change the level. Select the desired level. Press HOME

to save the changed setting and close the menu screen.

r In the following cases, the setting cannot be changed:

– Headphones are connected.

– Audio is output from the speakers of the TV.

– Muting is enabled.

r You cannot change the volume level of speakers when

"No" or "None" is set for them in "Sp Config".

HDMI Setup

The unit supports the linked system function such as power

on/off link when connected via HDMI cable with a CEC

(Consumer Electronics Control) compliant TV or player. You

need to change the initial setting to use the linked system

function, HDMI Through function and ARC (Audio Return

Channel) function.

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

HDMI CEC (RIHD)



Turning the TV to standby mode will turn the unit to

standby mode.



On the TV side, it is possible to set whether to output

audio from the speakers connected to the unit or from

the TV's speakers.



Starting playback of a CEC compliant player/recorder will

automatically switch the unit's input to the HDMI input of

the player/recorder. If the unit is in standby mode, it will

automatically be turned on.

Press RCV on the remote controller and then press

HOME.

Select "Setup" with the cursor buttons and press

ENTER.

Select "11. HDMI Setup" with the cursor buttons and

press ENTER.

Select "HDMI CEC (RIHD)" with the cursor buttons

and select "On".

HDMI Through

The function allows transmission from players to the TV

even if the unit is in standby. Setting the HDMI CEC (RIHD)

setting mentioned above to "On" can enable this setting

automatically. It is also necessary to make the HDMI linked

system setting on the TV. See the TV's instruction manual

for details.

r Although enabling the HDMI Through function increases

power consumption during standby.

ARC (Audio Return Channel)

Simple connection to the ARC compatible TV using a

single HDMI cable allows to listen to the TV sound from the

speakers connected to the unit. To use the ARC function,

connect the unit to the ARC compatible HDMI jack of the

TV. Then, set the HDMI CEC (RIHD) mentioned above to

"On" on the unit, and make the following setting.

Press RCV on the remote controller and then press

HOME.

Select "Setup" with the cursor buttons and press

ENTER.

Select "11. HDMI Setup" with the cursor buttons and

press ENTER.

Select "Audio Return Ch" with the cursor buttons

and select "Auto".

Audio output of connected players

To enjoy digital surround sound including Dolby Digital

and DTS, audio output should be set to "Bitstream

output" on the connected blu-ray disc player or other

devices. If the TV does not support bitstream signals,

set the audio output to "PCM output" on the player to

listen to the audio from the TV's speakers. For how

to set the player, see the instruction manual of the

player. Some settings of the blu-ray disc player may

prevent reproduction of DTS-HD Master Audio. In

that case, turn "BD video supplementary sound" (or

secondary sound) to "Off" and try again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR333 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR333

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info