Bedienungsanleitung Onkyo TX-SR373 (Seite 26 von 39) (Englisch)

686349

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Listening to your system

Setting the Audio options

There are a number of additional sound settings you can

make using the QUICK MENU menu. The defaults, if not

stated, are listed in bold.

Important

•

Note that if a setting doesn’t appear in the QUICK MENU

menu, it is unavailable due to the current source, settings

and status of the receiver.

Press

QUICK MENU

button.

Use





to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check

the table below for notes on this.

Use





to set it as necessary.

See the table below for the options available for each

setting.

Press to confirm and exit the menu.

a. You can change the Advanced Music Optimizer feature at any

time by using

M.OPT

button.

b. The default setting when the USB and BT Audio inputs are

selected is ON.

c. This setting works only with dual mono encoded Dolby Digital

and DTS soundtracks.

d. This is not displayed by default. You need to change some

settings on this unit to display the menu. (see Displaying the

Fixed PCM Setting menu on page 27).

e. The initial set AUTO is only available for Dolby TrueHD

signals. Select MAX or MID for signals other than Dolby

TrueHD.

f. This feature is only available when the connected display

supports the automatic audio/video synchronizing capability

(‘lip-sync’) for HDMI. If you find the automatically set delay

time unsuitable, set A.DLY to OFF and adjust the delay time

manually. For more details about the lip-sync feature of your

display, contact the manufacturer directly.

g. Only available with 2-channel sources in DOLBY PLII MUSIC

mode.

h. Only when listening to 2-channel sources in NEO:6 CINEMA

and NEO:6 MUSIC mode.

Setting/What it does Option(s)

EQ (Acoustic Calibration EQ)

Switches on/off the effect of Acoustic

Calibration EQ.

OFF

AV. SYN (A/V SYNC)

Some monitors have a slight delay when

showing video, so the soundtrack will be

slightly out of sync with the picture. By adding

a bit of delay, you can adjust the sound to

match the presentation of the video.

0 ms to 500 ms

(1 step : 5 ms)

Default: 0

M.OPT (Advanced Music Optimizer)

Switches on/off the effect of Advanced Music

Optimizer.

(see Using the Advanced Music Optimizer on

page 25)

OFF

SURR DSP

QUICK MENUQUICK MENUQUICK MENUQUICK MENU

DUAL MONO

Specifies how dual mono encoded Dolby

Digital soundtracks should be played.

CH1 – Channel 1

is heard only

CH2 – Channel 2

is heard only

CH1 CH2 – Both

channels heard

from front

speakers

F.PCM (Fixed PCM)

This is useful if you find there is a slight delay

before OFF recognizes the PCM signal on a

CD, for instance.

When ON is selected, noise may be output

during playback of non-PCM sources. Please

select another input signal if this is a

problem.

OFF

LATE NIGHT

Adjusts the level of dynamic range for movie

soundtracks optimized for Dolby Digital, DTS,

Dolby Digital Plus, Dolby TrueHD, DTS-HD

and DTS-HD Master Audio (you may need to

use this feature when listening to surround

sound at low volumes).

AUTO

OFF

MID

MAX

HDMI (HDMI Audio)

Specifies the routing of the HDMI audio

signal out of this receiver (AMP) or through to

a TV (THRU). When THRU is selected, no

sound is output from this receiver.

AMP

THRU

A.DLY (Auto Delay)

This feature automatically corrects the audio-

to-video delay between components

connected with an HDMI cable. The audio

delay time is set depending on the

operational status of the display connected

with an HDMI cable. The video delay time is

automatically adjusted according to the audio

delay time.

OFF

Setting/What it does Option(s)

C.WIDTH (Center Width)

(Applicable only when using a center speaker)

Spreads the center channel between the front

right and left speakers, making it sound wider

(higher settings) or narrower (lower settings).

Making the

C.WIDTH

setting “7” may cause no

sound to be output from the center channel.

0 to 7

Default: 3

DIMEN. (Dimension)

Adjusts the surround sound balance from

front to back, making the sound more distant

(minus settings), or more forward (positive

settings).

–3 to +3

Default: 0

PNRM. (Panorama)

Extends the front stereo image to include

surround speakers for a ‘wraparound’ effect.

OFF

C.IMG (Center Image)

(Applicable only when using a center

speaker)

Adjust the center image to create a wider

stereo effect with vocals. Adjust the effect

from 0 (all center channel sent to front right

and left speakers) to 10 (center channel sent

to the center speaker only).

0 to 10

Default: 3

(NEO:6 MUSIC),

10 (NEO:6

CINEMA)

Setting/What it does Option(s)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR373 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR373

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info