Bedienungsanleitung Onkyo TX-SR393 (Seite 52 von 95) (Englisch)

686348

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of

5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center

channel, two surround channels, and the LFE channel dedicated to the bass

region (sound elements for the subwoofer).

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

 DD+ (Dolby Audio - DD+)

This mode faithfully reproduces the sound design recorded in the Dolby Digital

Plus audio format.

The Dolby Digital Plus format has been improved based on Dolby Digital,

increasing the number of channels and endeavoring to improve sound quality

by giving more exibility in data bit rates. Dolby Digital Plus is an optional audio

format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of

7.1 channels with additional channels such as the surround back channel.

• To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

 DSur (Dolby Audio - Surr)

(Firmware version before supporting DSur 2.0, etc.)

This listening mode expands actual channels to more channels for playback

according to the conguration of the connected speakers by expanding the input

signals from 2 ch to 5.1 ch.

• This mode cannot be selected when DTS signal is input.

 DSur (Dolby Audio - Surr)

(Firmware version supporting DSur 2.0, etc.)

This listening mode expands 2 ch input signals to 5.1 ch. This mode expands

actual channels to more channels for playback according to the conguration

of the connected speakers. Also, even if there is no speaker for expansion, for

example when only front speakers are connected, audio of surround channel or

height channel is virtually created for expansion playback.

• This mode cannot be selected when DTS signal is input.

According to the speaker layout, the following listening modes are displayed.

–

DSur 2.0/2.1: When only front speakers are installed

– DSur 3.0/3.1: When front speakers and center speaker are installed

– DSur 4.0/4.1: When front speakers and surround speakers are installed

– DSur 5.0/5.1: When front speakers, center speaker and surround

speakers are installed

– DSur 2.0.2/2.1.2:

When front speakers and height speakers are installed

– DSur 3.0.2/3.1.2: When front speakers, center speaker and height

speakers are installed

• When "Speaker Virtualizer" (

p70) is set to "O" (Default: On), modes

other than DSur cannot be selected.

 DTHD (Dolby Audio - TrueHD)

This mode faithfully reproduces the sound design recorded in the Dolby TrueHD

audio format.

The Dolby TrueHD audio format is a "lossless" format expanded based on the

lossless compression technology referred to as MLP, and it faithfully reproduces

the master audio recorded in the studio. Dolby TrueHD is an optional audio

format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of

7.1 channels with additional channels such as the surround back channel. 7.1 ch

is recorded at 96 kHz/24 bit, and 5.1 ch is recorded at 192 kHz/24 bit.

• To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

 DSD

This mode is suitable for playing sources recorded in DSD.

• This unit supports the DSD signal input from the HDMI input terminal.

However, depending on the connected player, better sound may be obtained

by setting the output on the player side to the PCM output.

• This listening mode cannot be selected if the output setting on your Blu-ray

Disc/DVD player is not set to DSD.

 DTS

This mode faithfully reproduces the sound design recorded in the DTS audio

format.

The DTS audio format is a multi-channel digital format developed by DTS, Inc.

This format is an optional audio format for DVD-Video and a standard format

for Blu-ray Discs.It enables recording of 5.1 channels; two front channels, one

center channel, two surround channels, and the LFE channel dedicated to the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR393 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR393

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info