Bedienungsanleitung Onkyo TX-SR393 (Seite 65 von 95) (Englisch)

686348

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

1. Input/Output Assign

 1. TV Out / OSD

Make settings for TV output and On-Screen Displays (OSD) that appear on the

TV.

Setting Item Default Value Setting Details

1080p -> 4K

Upscaling

O When using a TV that supports 4K, video signals

input at 1080p can be automatically upscaled to 4K

for output.

"O": When this function is not to be used

"Auto": When this function is to be used

• Select "O" if your TV does not support 4K.

• If the TV does not support the 4K resolution

with the same frequency as the frequency of

HDMI input video signals, upscaling to 4K is not

correctly performed. Check the frequency of 4K

resolution supported by the TV, and change the

resolution of the video signals input from the AV

component.

Super Resolution 2 When you have set "1080p -> 4K Upscaling" to

"Auto", you can select the degree of video signal

correction from "O" and between "1" (weak) and

"3" (strong).

OSD Language English Select the on-screen display language from the

following.

(North American models) English, German, French,

Spanish, Italian, Dutch, Swedish

(European, Australian and Asian models) English,

German, French, Spanish, Italian, Dutch, Swedish,

Russian, Chinese

Setting Item Default Value Setting Details

Impose OSD On Set whether or not to display information such as

volume adjustment or switching of input on the TV

screen.

"On": OSD is displayed on the TV.

"O": OSD is not displayed on the TV.

• OSD may not be displayed depending on the

input signal even if "On" is selected. In this case,

change the resolution of the connected device.

Mini Player OSD Always On You can display on the TV the images from another

input selected last while playing the audio from

BLUETOOTH input. After switching the input to

BLUETOOTH, play the images and audio. And then

when you press MODE on the remote controller,

the image is displayed in full-screen mode, and the

audio information (Mini Player) for BLUETOOTH is

displayed in the corner of the screen. You can set

whether to always display this Mini Player on the

screen.

"Always On": The Mini Player is always displayed.

"Auto O": The Mini Player turns o automatically

in 30 seconds after displayed. If operation such as

changing the volume is performed, it is displayed

again for 30 seconds.

• Each time the MODE button is pressed, the

image display/non-display can be switched.

• This setting cannot be selected if "Impose OSD"

is set to "O".

• When "OSD Language" is set to Chinese, this

function cannot be used. (European, Australian

and Asian models)

Screen Saver 3 minutes Set the time to start the screen saver.

Select a value from "3 minutes", "5 minutes",

"10 minutes" and "O".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR393 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR393

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info