Bedienungsanleitung Onkyo TX-SR502E (Seite 50 von 60) (Englisch)

645311

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Controlling Other Components

You can use the TX-SR502/TX-SR502E’s remote con-

troller (RC-567M/RC-569M) to control your other AV

components, including those made by other manufactur-

ers. To do this you ﬁrst need to enter the appropriate

remote control code for your DVD player, TV, VCR,

cable receiver, or satellite receiver. Then you need to

select the corresponding remote controller mode (see

page 10).

By entering the appropriate remote control code, the

[CD], [MD], and [CDR] mode buttons can also be used

with other manufacturer’s components (e.g., DVD, TV,

VCR, satellite or cable receiver).

Entering the appropriate remote control code for your

TV, VCR, and so on will allow you to control it with the

TX-SR502/TX-SR502E’s remote controller. You’ll need

to perform this procedure for each component that you

want to control.

If the remote controller works as expected, the code has

been entered correctly. If not, try again or try another

code.

Codes for Onkyo DVD Players

The remote control code for an Onkyo DVD player

depends on whether it’s connected via , as follows:

5001:

Use this code if you’ve connected an cable

and an analog audio cable (RCA) to your DVD

player. This is the default setting, so if you’re

using , you don’t need to change anything.

Point the remote controller at the TX-SR502/

TX-SR502E to operate the DVD player.

5002:

Use this code if your DVD player doesn’t have

an socket, or you’re not using . Point

the remote controller at the DVD player to

operate it.

Resetting the [DVD], [CD], [MD] or [CDR]

Mode Button

By default, the [DVD], [CD], [MD] & [CDR] mode but-

tons are preprogrammed with remote control codes for

controlling Onkyo components connected via . If

you’ve entered another code for a button and now want

to return to its default, perform the following procedure.

Resetting the Remote Controller

This section explains how to reset the remote controller

to its default settings.

Entering Remote Control Codes

Look up the remote control code for your

component.

See “Remote Control Codes” on page 51.

While holding down the [DVD], [TV],

[VCR], [CABLE], [SAT], [CD], [MD], or

[CDR] mode button, press the [STANDBY]

button.

Within 30 seconds, use the number but-

tons to enter the 4-digit remote control

code.

10 0

CLEAR

123

456

789

V1 V2 V3

DVD MULTI CH

--/---

TAPE TUNER

INPUT

ENTER

VOL

CDR

SAT

AMP

TV VCR

CABLE

DVD

CD MD

DISC

TONE

TUNER/

TAPE

DISPLAY

INPUT

DIMMER SLEEP

MUTING

ON STANDBY

TV CH

V VOL

REMOTE MODE

DVD, CD, MD,

CDR, TV, VCR,

CABLE, SAT

STANDBY

Number

buttons

Select the remote controller mode, point

the remote controller at the component,

and check its operation.

Remote controller buttons that can be used in

DVD mode are shown on page 12. Those that can

be used with the TV, VCR, CABLE, and SAT

modes are shown on page 55.

While holding down the mode button that

you want to reset, press the TV [ ] but-

ton.

Release both buttons and wait two seconds.

Press the mode button again.

The mode button is reset.

While holding down the [AMP] mode but-

ton, press the

[STANDBY] button.

Release both buttons and wait ﬁve seconds.

Press the [AMP] mode button again.

The remote controller is reset.

TX-SR502_En.book Page 50 Tuesday, February 17, 2004 12:14 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR502E Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR502E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info