Bedienungsanleitung Onkyo TX-SR503 (Seite 16 von 60) (Englisch)

645318

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Connecting Your Speakers

—Continued

For the best surround-sound experience, you should con-

nect seven speakers and a powered subwoofer.

The following table shows which channels you should

use based on the number of speakers that you have.

*If you’re using only one surround back speaker, connect it to

the left (L) SURROUND BACK SPEAKERS terminals.

No matter how many speakers you use, a powered sub-

woofer is recommended for a really powerful and solid

bass.

Before using the AV receiver, you must specify which

speakers are connected and their sizes (see page 32).

To get the very best from your surround-sound system,

you should also specify the distance between the listener

and each individual speaker so that the sound from each

speaker arrives at the listener’s ears at the same time (see

page 50). In addition, you should set the level of each

individual speaker to achieve an equal balance (see

page 50.)

The AV receiver’s positive (+) speaker terminals are

color-coded for ease of identiﬁcation. (The negative (–)

speaker terminals are all black.)

The supplied speaker labels are also color-coded and you

should attach them to the positive (+) side of each

speaker cable in accordance with the above table. All you

need to do then is to match the color of each label to the

corresponding speaker terminal.

Read the following before connecting your speakers:

•

American model only:

You can connect speakers

with an impedance of 6 ohms or higher. If you use

speakers with a lower impedance, and use the ampli-

ﬁer at high volume levels for a long period of time, the

built-in protection circuit may be activated.

•

Other models:

You can connect speakers with an

impedance of between 4 and 16 ohms. If the imped-

ance of any of the connected speakers is 4 ohms or

more, but less than 6 ohms, be sure to set the Mini-

mum Speaker Impedance to “4 ohms” (see page 32).

If you use speakers with a lower impedance, and use

the ampliﬁer at high volume levels for a long period of

time, the built-in protection circuit may be activated.

• Disconnect the power cord from the wall outlet before

making any connections.

• Read the instructions supplied with your speakers.

•Pay close attention to speaker wiring polarity. In other

words, connect positive (+) terminals to only positive

(+) terminals, and negative (–) terminals to only nega-

tive (–) terminals. If you get them the wrong way

around, the sound will be out of phase and will sound

unnatural.

• Unnecessarily long, or very thin speaker cables may

affect the sound quality and should be avoided.

• Be careful not to short the

positive and negative wires.

Doing so may damage the AV

receiver.

• Don’t connect more than one

cable to each speaker termi-

nal. Doing so may damage the

AV receiver.

• Don’t connect one speaker to several terminals.

Speaker Conﬁguration

Number of speakers: 234567

Front left

✓✓✓✓✓✓

Front right

✓✓✓✓✓✓

Center

✓ ✓✓✓

Surround left

✓✓✓✓

Surround right

✓✓✓✓

Surround back*

✓

Surround back left

✓

Surround back right

✓

Attaching the Speaker Labels

Speaker terminal Color

Front left White

Front right Red

Center Green

Surround left Blue

Surround right Gray

Surround back left Brown

Surround back right Tan

Speaker Connection Precautions

TX-SR503_En.book Page 16 Friday, February 25, 2005 9:35 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR503 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR503

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info