Bedienungsanleitung Onkyo TX-SR503E (Seite 56 von 60) (Englisch)

645317

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Troubleshooting

—Continued

The subwoofer produces no sound?

• The subwoofer outputs no sound while only speaker

set B is on. Turn on speaker set A.

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces

no sound.

• Make sure the speakers are conﬁgured correctly

(page 32).

Speaker set B produces no sound?

• Speaker set B outputs only analog input signals. Make

sure that the analog audio cables are connected prop-

erly.

There’s no sound with a certain signal format?

• Check the digital audio output setting on the con-

nected device. On some games consoles, such as those

that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an

audio output format from a menu.

Can’t get 6.1 or 7.1-channel playback?

• When speaker B is turned on, speaker set A is reduced

to 5.1-channel playback.

The volume cannot be set to 79?

• When the levels of all speakers have been calibrated

(pages 41, 50), the maximum volume setting may

change.

Noise can be heard?

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work?

• Make sure the source material is Dolby Digital

(page 46).

The DVD analog multichannel input doesn’t

work?

• Check the DVD analog multichannel input connec-

tions (page 23).

•To select the DVD analog multichannel input, press

the [MULTI CH] input selector button.

• Check the audio output settings on your DVD player.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver remains in DTS listen-

ing mode and the DTS indicator remains on. This is to

prevent noise when you use the pause, fast forward, or

fast reverse function on your player. If you switch your

player from DTS to PCM, because the AV receiver

does not switch formats immediately, you may not

hear any sound, in which case you should stop your

player for about three seconds, and then resume play-

back.

•With some CD players, you won’t be able to playback

DTS material properly even though your player is con-

nected to a digital input on the AV receiver. This is

usually because the DTS bitstream has been processed

(e.g., output level, sampling rate, or frequency

response changed) and the AV receiver doesn’t recog-

nize it as a genuine DTS signal. In such cases, you

may hear noise.

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

There’s no picture?

• Make sure that all video connecting plugs are pushed

in all the way (page 20).

• Make sure that each video component is properly con-

nected.

• The AV receiver does not convert between formats. So

if your video component is connected to a component

video input, your TV must be connected to the compo-

nent video output (page 21).

• On your TV, make sure that the video input to which

the AV receiver is connected is selected.

• While the Pure Audio listening mode (not North

American model) is selected, the video circuits are

turned off and the AV receiver outputs no video sig-

nals.

Reception is noisy, stereo FM reception suffers

from hiss, or the FM STEREO indicator doesn’t

appear?

• Relocate your antenna.

•Move the AV receiver away from your TV or com-

puter.

• Listen to the station in mono (page 36).

• When listening to an AM station, operating the remote

controller may cause noise.

•Passing cars and airplanes can cause interference.

• Concrete walls weaken radio signals.

• If nothing improves the reception, install an outdoor

antenna.

Video

Tuner

TX-SR503_En.book Page 56 Friday, February 25, 2005 9:35 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR503E Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR503E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info