Bedienungsanleitung Onkyo TX-SR504E (Seite 35 von 80) (Englisch)

645342

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

First Time Setup

—Continued

Use the Down [ ] button to

select “Center,” and then use the

Left and Right [ ]/[ ] buttons to

select

Small

Large

, or

None

Small:

Select if the center speaker is

small.

Large:

Select if the center speaker is

large.

None:

Select if no center speaker is

connected.

Note:

• If the Front setting in step 4 is set to

Small, the Large option cannot be

selected.

Use the Down [ ] button to

select “Surround,” and then use

the Left and Right [ ]/[ ] but-

tons to select

Small

Large

, or

None

Small:

Select if the surround speak-

ers are small.

Large:

Select if the surround speak-

ers are large.

None:

Select if no surround speakers

are connected.

Note:

• If the Front setting in step 4 is set to

Small, the Large option cannot be

selected.

Use the Down [ ] button to

select “Surr Back,” and use the

Left and Right [ ]/[ ] buttons to

select

Small

Large

, or

None

Small:

Select if the surround back

speakers are small.

Large:

Select if the surround back

speakers are large.

None:

Select if no surround back

speakers are connected.

Notes:

• If the Surround setting in step 6 is set

to None, this setting does not appear.

• If the Surround setting in step 6 is set

to Small, the Large option cannot be

selected.

Use the Down [ ] button to

select “Surr Back Ch,” and use

the Left and Right [ ]/[ ] but-

tons to select

2ch

1ch

2ch:

Select if two (left and right)

surround back speakers are

connected.

1ch:

Select if one surround back

speaker is connected.

Note:

• If the Surround and Surr Back set-

tings in steps 6 and 7 are set to None,

this setting does not appear.

Press the [SETUP] button.

Setup closes.

SETUP

Testing the Speakers

To test that all of the speakers are working properly,

press the remote controller’s [TEST TONE] but-

ton.

The test tone will be output by each speaker in turn

and the name of each speaker will appear on the dis-

play. To turn off the test tone, press the [TEST

TONE] button again.

• If the test tone is not produced by a speaker, or it’s

produced by a speaker other than that shown on

the display, you may have wired the speakers

incorrectly and you should check your connec-

tions (see page 17).

• If the test tone is not produced by a speaker and its

name does not appear on the display, you may

have set the speaker conﬁguration incorrectly (see

page 34).

•Testing cannot be performed while speaker set B

is on or a pair of headphones is connected.

RANDOM

SUBTITLE

PLAY MODE

AUDIO REPEAT

647M

HDDDVD

VCR

LISTENING MODE

DISPLAY

TEST

TONE

CH SEL

SURROUND

STEREO

CINE FLTR

LEVEL

L NIGHT

TEST

TONE

TX-SR504_En.book Page 35 Thursday, February 2, 2006 3:46 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR504E Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR504E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info