Bedienungsanleitung Onkyo TX-SR576 (Seite 92 von 96) (Englisch)

61856

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

—Continued

There’s no picture from a source connected to

an HDMI IN

• Reliable operation with an HDMI-to-DVI adapter is

not guaranteed. In addition, video signals from a PC

are not supported (page 28).

• If the message “Resolution Error” appears on the AV

receiver’s display, this indicates that your TV does not

support the current video resolution and you need to

select another resolution on your DVD player.

Reception is noisy, stereo FM reception suffers

from hiss, or the FM STEREO indicator doesn’t

light up

• Relocate your antenna.

•Move the AV receiver away from your TV or com-

puter.

• When listening to an AM station, operating the remote

controller may cause noise.

•Passing cars and airplanes can cause interference.

• Concrete walls weaken radio signals.

• If nothing improves the reception, install an outdoor

antenna.

The remote controller doesn’t work

• Make sure that the batteries are installed with the cor-

rect polarity (page 13).

• Make sure that the remote controller is not too far

away from the AV receiver and there’s no obstruction

between the remote controller and the AV receiver’s

remote control sensor (page 13).

• Make sure you’ve selected the correct remote control-

ler mode.

• Make sure you’ve entered the correct remote control

code (page 81).

Can’t control other components

• Make sure you’ve selected the correct remote control-

ler mode.

• If you’ve connected an -capable Onkyo MD

recorder, CD recorder, or RI Dock to the TAPE

IN/OUT jacks, or an RI Dock to the CBL/SAT IN

jacks, for the remote controller to work properly, you

must set the Input Display to MD, CDR, or DOCK,

respectively (see page 43).

• The entered remote control code may not be correct. If

more than one code is listed, try each one.

•With some AV components, certain buttons may not

work as expected, and some may not work at all.

•To control an Onkyo component that’s connected via

, point the remote controller at the AV receiver. Be

sure to enter the appropriate remote control code ﬁrst

(page 82).

•To control an Onkyo component that’s not connected

via , or another manufacturer’s component, point

the remote controller at that component. Be sure to

enter the appropriate remote control code ﬁrst

(page 81).

Can’t record

• On your recorder, make sure the correct input is

selected.

•To prevent signal loops and damage to the AV

receiver, input signals are not fed through to outputs

with the same name (e.g., TAPE IN to TAPE OUT or

VCR/DVR IN to VCR/DVR OUT).

• When the Pure Audio listening mode is selected, video

recording is not possible because no video signals are

output. Select another listening mode.

The sound changes when I connect my head-

phones

• When a pair of headphones is connected, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, or Pure Audio, in which case it stays the

same.

How do I change the language of a multiplex

source

• On the “Audio Adjust” menu, change the “Input

(Mux)” setting to Main or Sub (page 63).

The functions don’t work

•To use , you must make an connection and an

analog audio connection (RCA) between the compo-

nent and AV receiver, even if they are connected digi-

tally (page 34).

• While Zone 2 is selected, the functions don’t

work.

The AV receiver’s display doesn’t work

• The display is turned off when the Pure Audio listen-

ing mode is selected. Select another listening mode.

Tuner

Remote Controller

Recording

Others

TX-SR506_En.book Page 92 Friday, March 7, 2008 1:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR576 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR576

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info