Bedienungsanleitung Onkyo TX-SR602 (Seite 65 von 96) (Englisch)

645309

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Operation

—Continued

You can adjust the level of individual speakers during

playback. These adjustments are temporary and will be

cancelled when the AV receiver is set to Standby.

Notes:

•You cannot use this function while the AV receiver is

muted.

• Speakers that are set to No or None in the Speaker

Conﬁguration cannot be adjusted.

The DVD analog multichannel input is for connecting

components with a 5.1-channel analog audio output,

such as a DVD player or MPEG decoder.

See “Using a Multichannel Connection” on page 29 for

connection information.

Notes:

•To use the bass and treble functions with the DVD

analog multichannel input, select the Multich listening

mode ﬁrst.

Adjusting Individual Speaker Levels

You can adjust the level of individual speakers while

using the DVD analog multichannel input.

Notes:

• These speaker level settings are completely indepen-

dent of those explained on pages 50 and left column.

• While the DVD analog multichannel input is selected,

you can only select the Direct, Pure Audio (not Amer-

ican TX-SR602), or Multich listening mode. If you

select the DVD analog multichannel input while using

another listening mode, that listening mode will be

cancelled.

• While the DVD analog multichannel input is selected,

the Automatic Speaker Setup and Speaker Conﬁgura-

tion settings on page 46 are ignored, and signals from

the multichannel input are fed to the front left, front

right, center, surround left, and surround right speak-

ers, and subwoofer regardless of those settings.

• On the TX-SR702E, you can select the listening

modes as explained on page 61. In addition, sound is

output by the surround back speakers.

Adjusting Individual Speaker Levels

Press the [RECEIVER] button,

use the [CH SEL] button to select

each speaker, and use the

[LEVEL–] and [LEVEL+] buttons

to adjust the volume.

Speakers are selected in the following

order: Front Left

→

Center

→

Front

Right

→

Surr Right

→

Surr Back

Right

→

Surr Back Left

→

Surr left

→

Subwoofer.

You can adjust the volume of each

speaker from –12 dB to +12 dB

(–15 dB to +12 dB for the subwoofer).

The name of the currently selected

speaker and its volume appear on the

display, as shown.

RECEIVER

CH SEL

LEVEL – +

MULTI CH

RECEIVER

CH SEL

LEVEL

Using the DVD Analog Multichannel

Input

Press the [RECEIVER] button fol-

lowed by the [MULTI CH] button

so that “MCH” appears on the

display.

Use the remote controller’s [CH

SEL] button to select each

speaker, and then use the

[LEVEL–] and [LEVEL+] buttons

to adjust the volume.

The level can be adjusted from –12 to

+12 dB (–30 to +12 dB for the sub-

woofer).

RECEIVER

CH SEL

LEVEL

TX-NR702,602_En.book Page 65 Monday, July 26, 2004 11:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR602 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR602

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info