Bedienungsanleitung Onkyo TX-SR602 (Seite 69 von 96) (Englisch)

645309

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Setup

—Continued

■

c. SurrBack Mode

This setting determines which surround mode is used for

Dolby Digital input signals that don’t contain a Dolby

Digital EX ﬂag, or when the b. Dolby EX setting is set to

Manual. This setting is unavailable if no surround back

speakers are connected.

You can select PLIIx Movie (default), PLIIx Music, or

Dolby D, or Dolby D EX.

• If only one surround back speaker is connected, PLIIx

Movie is unavailable.

■

d. THX Mode (TX-SR702/702E only)

This setting determines which surround mode is used

when THX is used with Dolby Digital input signals. This

setting is unavailable if no surround back speakers are

connected.

You can select THX SurrEX (default), PLIIx+THX, or

THX Cinema.

• If only one surround back speaker is connected,

PLIIx+THX is unavailable.

3-3. DTS

These settings apply to DTS input signals.

■

a. LFE Level

With this setting you can set the level of the LFE (Low

Frequency Effects) channel for DTS sources to –

∞

–10 dB, or 0 dB (default).

If you ﬁnd that the low-frequency effects are too loud

when playing DTS sources, set this to –10 dB or –

∞

dB.

■

b. SurrBack Mode

This setting determines which surround mode is used for

DTS input signals that are not DTS-ES. (The handling of

DTS-ES input signals is determined automatically.) This

setting is unavailable if no surround back speakers are

connected.

You can select DTS+Neo:6 (default), Dolby EX, PLIIx

Movie, PLIIx Music, or DTS.

• If only one surround back speaker is connected, PLIIx

Movie is unavailable.

■

c. THX Mode (TX-SR702/702E only)

This setting determines which surround mode is used

when THX is used with DTS input signals. This setting

is unavailable if no surround back speakers are con-

nected.

You can select THX SurrEX, Neo:6+THX (default),

PLIIx+THX, or THX Cinema.

• If only one surround back speaker is connected,

PLIIx+THX is unavailable.

3-4. D.F. 2ch

These settings apply to digital input signals, Dolby Dig-

ital and so on, with only 2 channels (2/0).

■

a. Input Channel (Mono)

This setting determines which channel is output when

the Mono listening mode is used with a stereo source.

L+R:

Both the left and right channels are output

(default).

Left:

Only the left channel is output.

Right:

Only the right channel is output.

■

b. Surround Mode

This setting determines the default surround mode for

digital input signals, Dolby Digital and so on, with only

2 channels (2/0). This setting is unavailable if no center

and surround speakers are connected.

You can select PLIIx Movie (default), PLIIx Music,

PLIIx Game, Neo:6 Cinema, or Neo:6 Music.

3-5. Multiplex

This setting applies to multiplex input signals.

■

a. Input Channel

This setting determines which channel is output from a

stereo multiplex source. Use it to select audio channels

or languages with multiplex sources, multilanguage TV

broadcasts, and so on.

Main:

The main channel is output (default).

Sub:

The sub channel is output.

Main/Sub:

Both the main and sub channels are output.

3-6. Multichannel Input

These settings apply to the analog multichannel input.

■

a. Subwoofer Sensitivity

When using the DVD analog multichannel input, the

loudness of the connected subwoofer also depends on

the component that’s connected to that input. If you ﬁnd

that it’s too loud, set this to 0 dB, +5 dB, +10 dB, or

+15 dB. The default setting is 0 dB.

■

b. SurrBack Mode (TX-SR702E only)

If you’re using surround back speakers, this setting

determines which surround mode is used with analog

multichannel input signals. This setting is unavailable if

no surround back speakers are connected.

You can select Dolby EX, PLIIx Movie (default), PLIIx

Music, or Multich (straight 5.1-channel playback).

• If only one surround back speaker is connected, PLIIx

Movie is unavailable.

■

c. THX Mode (TX-SR702E only)

This setting determines which surround mode is used

when THX is used with analog multichannel input sig-

nals. This setting is unavailable if no surround back

speakers are connected.

You can select THX SurrEX (default), PLIIx+THX, or

THX Cinema.

• If only one surround back speaker is connected,

PLIIx+THX is unavailable.

If you’re not using any surround back speakers, “PLIIx”

will be “PLII.”

If you’re not using any surround speakers, Neo:6 Music

cannot be selected.

TX-NR702,602_En.book Page 69 Monday, July 26, 2004 11:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR602 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR602

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info