Bedienungsanleitung Onkyo TX-SR604E (Seite 65 von 92) (Englisch)

469192

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Recording

This section explains how to record the selected input

source to a component with recording capability, and

how to record audio and video from different sources.

Notes:

• The surround sound and DSP listening modes cannot

be recorded.

• Copy-protected DVDs cannot be recorded.

• You cannot record from the DVD analog multichannel

input.

• Various restrictions apply to digital recording. Refer

to the manuals supplied with your digital recording

equipment for more details.

• Digital signals received at COAXIAL IN/OPTICAL

IN or HDMI IN 1/2 are only output by OPTICAL

OUT. However, certain types of digital signal such as

DVD-Audio signal input from HDMI IN will not be

output. Analog input signals are output by only the

analog outputs. There is no internal conversion from

digital to analog or vice versa.

• DTS signals will be recorded as noise, so don’t

attempt analog recording of DTS CDs or LDs.

• While the listening mode is set to Pure Audio, no

image is provided because the power is turned off for

the video circuit. If you want to make recordings,

select other listening mode.

AV Recording

Audio sources can be recorded to a recorder (e.g., cas-

sette deck, CDR, MD) connected to the TAPE OUT or

DIGITAL OPTICAL OUT jacks. Video sources can be

recorded to a video recorder (e.g., VCR, DVD recorder)

connected to the to VIDEO 1 OUT or VIDEO 2 OUT

jacks. See pages 23 to 36 for hookup information.

Recording Separate AV Sources

Here you can record audio and video from completely

separate sources, allowing you to overdub audio onto

your video recordings. This function takes advantage of

the fact that when an audio-only input source (i.e.,

TAPE, TUNER, or CD) is selected, the video input

source remains unchanged.

In the following example, audio from the CD player con-

nected to the CD IN, and video from the camcorder con-

nected to the VIDEO 4 INPUT VIDEO jack are recorded

by the VCR connected to the VIDEO 1 OUT jacks.

Use the input selector buttons to

select the source that you want

to record.

You can watch the source while record-

ing. The AV receiver’s VOLUME con-

trol has no effect on recording.

On your recorder, start record-

ing.

On the source component, start

playback.

If you select another input source dur-

ing recording, that input source will be

recorded.

VIDEO 4 TAPE

TUNER

VIDEO 3

DVD

VIDEO 1

VCR 1 VCR 2

VIDEO 2

Prepare the camcorder and CD player for

playback.

Prepare the VCR for recording.

Press the [VIDEO 4] input selector button.

Press the [CD] input selector button.

This selects the CD player as the audio source, but

leaves the camcorder as the video source.

Start recording on the VCR and start play-

back on the camcorder and CD player.

The video from the camcorder and the audio from

the CD player are recorded by the VCR.

Camcorder

VCRCD player

video signal

audio signal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR604E Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR604E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info