Bedienungsanleitung Onkyo TX-SR605 (Seite 19 von 100) (Englisch)

62549

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Connecting the AV Receiver/AV Amplifier—Continued

Speaker Configuration

For the best surround sound experience, you should con-

nect seven speakers and a powered subwoofer.

The following table indicates the channels you should

use depending on the number of speakers that you have.

*If you’re using only one surround back speaker, connect it to

the left (L) SURR BACK SPEAKERS terminals.

No matter how many speakers you use, a powered sub-

woofer is recommended for a really powerful and solid

bass.

To get the best from your surround sound system, you

need to set the speaker settings by using the supplied

speaker setup microphone (see page 41).

Using Dipole Speakers

You can use dipole speakers for the surround left and

right and surround back left and right speakers. Dipole

speakers output the same sound in two directions.

Dipole speakers typically have an arrow printed on them to

indicate how they should be positioned. The surround left

and right

dipole

speakers should be positioned so that their

arrows point toward the TV/screen, while the surround

back left and right dipole speakers should be positioned so

that their arrows point toward each other, as shown.

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver/AV

amplifier’s PRE OUT SUBWOOFER to an input on

your powered subwoofer, as shown. If your subwoofer is

unpowered and you’re using an external amplifier, con-

nect the PRE OUT SUBWOOFER to an input on the

amp.

Attaching the Speaker Labels

The AV receiver/AV amplifier’s positive (+) speaker ter-

minals are color-coded for ease of identification (the

negative (–) speaker terminals are all black).

The supplied speaker labels are also color-coded and you

should attach them to the positive (+) side of each

speaker cable in accordance with the above table. Then

all you need to do is to match the color of each label to

the corresponding speaker terminal.

Using the Speaker Terminal Tool

The supplied speaker terminal tool makes it easy to

tighten and loosen the speaker terminals. If you are using

banana plugs, to ensure optimum sound quality, tighten

the speaker terminal before inserting the banana plug.

(In Europe, using banana plugs to connect speakers to an

audio amplifier is prohibited.)

Connecting Your Speakers

Number of speakers: 2 3 4 5 6 7

Front left ✓✓✓✓✓✓

Front right ✓✓✓✓✓✓

Center ✓✓✓✓

Surround left ✓✓✓✓

Surround right ✓✓✓✓

Surround back* ✓

Surround back left ✓

Surround back right ✓

7 8

TV/screen

1. Subwoofer

2. Front left speaker

3. Center speaker

4. Front right speaker

5. Surround left speaker

6. Surround right speaker

7. Surround back left

speaker

8. Surround back right

speaker

Dipole speakers

Normal speakers

Speaker terminal Color

Front left, Zone 2 left White

Front right, Zone 2 right Red

Center Green

Surround left Blue

Surround right Gray

Surround back left Brown

Surround back right Tan

LINE INPUT

Powered

subwoofer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR605 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR605

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info