Bedienungsanleitung Onkyo TX-SR605 (Seite 84 von 100) (Englisch)

62549

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Advanced Setup—Continued

HDMI Audio Out

This preference determines whether audio received at

the HDMI IN is output by the HDMI OUT. You may

want to turn this preference on if your TV is connected

to the HDMI OUT and you want to listen to the audio

from a component that’s connected to an HDMI IN,

through your TV’s speakers. Normally, this should be set

to Off.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:

• If On is selected and the signal can be output by the

TV, the AV receiver/AV amplifier will output no

sound through its speakers.

• When TV Control is enabled, this setting is set to

Auto.

• With some TVs and input signals, no sound may be

output even when this setting is set to On.

Lip Sync

The AV receiver/AV amplifier can be set to automati-

cally correct any delay between the video and the audio,

based on the data from the connected monitor.

Disable: HDMI lip sync disabled.

Enable: HDMI lip sync enabled.

Notes:

• This function works only if your HDMI-compatible

TV supports HDMI Lip Sync.

• You can check the amount of delay being applied by

the HDMI Lip Sync function on the A/V Sync screen

(see page 80).

xvYCC

If you set the xvYCC color function to Enable while a

source and monitor that both support the xvYCC color

standard are connected to HDMI, the color quality will

be improved.

Disable: xvYCC color disabled.

Enable: xvYCC color enabled.

Notes:

• If the color is unnatural when xvYCC color is set to

Enable, change the setting to Disable.

• Refer to the connected component’s instruction man-

ual for details.

Control

This function allows CEC-standard-compatible equip-

ment connected to HDMI and RIHD-compatible equip-

ment to be operated together with the AV receiver/AV

amplifier.

Disable: HDMI Control disabled.

Enable: HDMI Control enabled.

Notes:

• Set to Disable when a connected piece of equipment is

not compatible or it is unclear whether the equipment

is compatible or not.

• If movement is unnatural when set to Enable, change

the setting to Disable.

• Refer to the connected component’s instruction man-

ual for details.

■ Power Control

To link the electrical connection of CEC-standard-com-

patible equipment and RIHD-compatible equipment by

means of HDMI, set to Enable. However, it may not be

possible to power link equipment, depending on the set-

tings and compatibility of the connected equipment.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:

• The Power Control setting can be set only when the

above Control setting is set to Enable.

• HDMI power control only works with HDMI-compat-

ible components that support it.

• When set to Enable, power consumption will increase.

(North American models)

• The AV receiver/AV amplifier enters Ready mode

when set to Standby. (not North American models)

• Refer to the connected component’s instruction man-

ual for details.

■ TV Control

Set to Enable when you want to control the AV receiver/

AV amplifier from an RIHD-compatible TV that is con-

nected to HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

• Set to Disable when the TV is not compatible or when

it is unclear whether the TV is compatible or not.

• The Power Control setting can be set only when the

above Control and Power Control settings are both set

to Enable.

• Refer to the connected component’s instruction man-

ual for details.

Note:

After changing the settings of the Control, Power

Control, or TV Control, turn off the power to all

connected pieces of equipment and then turn on

again. Refer to the User’s Manuals for all connected

pieces of equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR605 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR605

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info