Bedienungsanleitung Onkyo TX-SR653E (Seite 74 von 92) (Englisch)

645330

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Advanced Setup—Continued

a. Maximum Volume

With this preference, you can prevent the volume being

set too high by specifying a maximum volume level.

The range is from 50 to 99. To specify no maximum vol-

ume, select Off.

b. Power On Volume

With this preference, you can specify the volume setting

to be used each time the AV receiver is turned on.

The range is MIN, 1 through 50. To use the same volume

level that was used when the AV receiver was turned off,

select Last.

c. Immediate Display

This preference determines whether or not actions, such

as selecting an input source, are displayed onscreen.

Normal: Select if your TV is 4:3.

Wide: Select if your TV is 16:9.

Off: Actions not displayed.

Even if this preference is set to Normal or Wide, actions

are not displayed on the TV or projector that’s connected

to the COMPONENT VIDEO OUT.

d. Scan Mode

If the text in onscreen setup menus ﬂickers due to com-

patibility with the connected display device (TV, projec-

tor, etc.), set the Scan Mode to Non-Interlaced.

Interlaced:Default.

Non-Interlaced:Select if the text ﬂickers.

• Depending on the display device, when Non-Inter-

laced is selected, the onscreen setup menus may not

appear. If this happens, use the AV receiver’s display

and repeat the procedure to revert to Interlaced.

e. Remote ID

With this setting, you can change the AV Receiver’s

remote control ID. You may need to change this if the

remote controller’s control codes overlap with those of

another Onkyo component located in the same room.

• If you change the AV receiver’s remote control ID, be

sure to set the same ID on both the AV receiver and

remote controller (see page 75). The default ID for

both is 1.

f. IR IN Position

When using a commercially available IR receiver, use

this setting to specify its location.

Main: Select if the IR receiver is located in the main

room.

Zone 2: Select if the IR receiver is located in, and will

be used to control Zone 2.

The digital input signal formats are available only for the

input sources that you have assigned a digital input jack;

otherwise you will see “Analog” indicated on the screen

(see page 42).

Normally, the AV receiver detects the signal format auto-

matically. However, if you experience either of the fol-

lowing issues when playing PCM or DTS material, you

can manually set the signal format to PCM or DTS:

• If the beginnings of tracks from a PCM source are cut

off, try setting the format to PCM.

• If noise is produced when fast forwarding or reversing

a DTS CD, try setting the format to DTS.

Digital Input Signal Formats

Press and hold the AV receiver’s [DIGI-

TAL INPUT] button for about 3 seconds.

While “Auto” is displayed (about 3 sec-

onds), press the [DIGITAL INPUT] button

again to select: PCM, DTS, or Auto.

DTS or PCM: The DTS or PCM indicator,

depending on which format you have set, ﬂashes,

and only signals in that format are output. Digital

signals in other formats are ignored.

Auto (default): The format is detected automat-

ically. If no digital input signal is present, the cor-

responding analog input is used instead.

STANDBY/ON

ZONE2

ZONE 2 LEVEL

PHONES

PURE AUDIO MULTl CH

TONE

STEREO

LISTENING MODE

DISPLAY

DIGITAL INPUT

RT/PTY/TP MEMORY

TUNING MODE

RETURN

TUNING / PRESET

ENTER

SETUP

DVD VIDEO 1 VIDEO 2

VCR 1 VCR 2

VIDEO 3 VIDEO 4 TAPE TUNER CD

SETUP MIC S VIDEO VIDEO

MASTER VOLUME

VIDEO 4 INPUT

AUDIO

DIGITAL

OFF

STANDBY

CLEAR

DIGITAL INPUT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR653E Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR653E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info