Bedienungsanleitung Onkyo TX-SR674E (Seite 36 von 92) (Englisch)

446896

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Connecting the AV Receiver—Continued

With (Remote Interactive), you can use the follow-

ing special functions:

■ Auto Power On/Standby

When you start playback on a component connected

via , if the AV receiver is on Standby, it will

automatically turn on and select that component as

the input source. Similarly, when the AV receiver is

set to Standby, all components connected via

will also go on Standby. This function will not work

on components connected to an AC OUTLET on the

AV receiver.

■ Direct Change

When playback is started on a component connected

via , the AV receiver automatically selects that

component as the input source. If your DVD player

is connected to the AV receiver’s multichannel DVD

input, you’ll need to press the [MULTI CH] button

to hear all channels (see page 50), as the Direct

Change function only selects the FRONT DVD

IN jacks.

■ Remote Control

You can use the AV receiver’s remote controller to

control your other -capable Onkyo components,

pointing the remote controller at the AV receiver’s

remote control sensor instead of the component. You

must enter the appropriate remote control code ﬁrst

(see page 84).

Notes:

• Use only cables for connections. cables

are supplied with Onkyo players (DVD, CD, etc.).

• Some components have two jacks. You can con-

nect either one to the AV receiver. The other jack is for

connecting additional -capable components.

• Connect only Onkyo components to jacks. Con-

necting other manufacturer’s components may cause a

malfunction.

• Some components may not support all functions.

Refer to the manuals supplied with your other Onkyo

components.

The AV receiver has an AC outlet on its rear panel for

connecting the power cord of another AV component.

The other component’s power switch can then be left in

the ON position so that it turns on or off when the AV

receiver is set to On or Standby.

Caution:

Make sure that the capacity of the component that you

connect to the AC OUTLET does not exceed the stated

capacity (e.g., 100W).

Notes:

• Onkyo components with jacks should be con-

nected directly to wall outlets, not the AV receiver’s

AC OUTLET.

• The socket type and capacity will depend on the coun-

try in which you purchased the AV receiver.

Connecting Onkyo Components

Step 1: Make sure that each Onkyo component is

connected to the AV receiver with an analog

audio cable (connection in the hookup

examples) (see pages 24 to 35).

Step 2: Make the connection.

Step 3: If you’re using an MD, CDR, or HDD com-

ponent, change the input display (see page

47).

Connecting the Power Cord of

Another Component

FRONT

DVD

REMOTE

CONTROL

ANALOG

AUDIO OUT

ANALOG

AUDIO OUT

e.g., CD player

e.g., DVD player

North American modelsEuropean and some

Asian models

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR674E Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR674E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info