Bedienungsanleitung Onkyo TX-SR674E (Seite 51 von 92) (Englisch)

446896

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Basic Operations—Continued

You can adjust the brightness of the display.

You can temporarily mute the output of the AV receiver.

With the sleep timer, you can set the AV receiver to turn

off automatically after a speciﬁed period.

If you need to cancel the sleep timer, press the [SLEEP]

button repeatedly until the SLEEP indicator disappears.

To check the time remaining until the AV receiver sleeps,

press the [SLEEP] button. Note that if you press the

[SLEEP] button while the sleep time is being displayed,

you’ll shorten the sleep time by 10 minutes.

You can connect a pair of stereo headphones (1/4-inch

phone plug) to the AV receiver’s PHONES jack for pri-

vate listening, as shown.

Notes:

• Always turn down the volume before connecting your

headphones.

• The speakers are turned off while the headphones plug

is inserted in the PHONES jack (Zone 2 speakers are

not turned off).

• When you connect a pair of headphones, the listening

mode is set to Stereo, unless it’s already set to Stereo,

Mono, Direct, or Pure Audio (not North American

models).

• Only the Stereo, Direct, Pure Audio (not North Amer-

ican models), and Mono listening modes can be used

with headphones (the listening modes available also

depend on the currently selected input source).

• When the multichannel input is used, only the front

left and right audio can be heard in the headphones.

• To adjust the headphone level, press the [CH SEL]

button on the remote controller, and then press the

[LEVEL +]/[LEVEL -] buttons. You can adjust the

level between –12 dB and +12 dB.

Setting the Display Brightness

Press the [RECEIVER] button,

and then press the [DIMMER]

button repeatedly to select:

• Normal+VOLUME light on.

• Normal+VOLUME light off.

• Dim+VOLUME light off.

• Dimmer+VOLUME light off.

Muting the AV Receiver

Press the [RECEIVER] button,

and then press the [MUTING] but-

ton.

The output is muted and the MUTING

indicator ﬂashes on the display, as

shown.

To unmute the AV receiver, press the

[MUTING] button again, or adjust the

volume.

The Mute function is cancelled when

the AV receiver is set to Standby.

MUTING

GUIDE

TOP MENU

PLAYLIST/CAT PLAYLIST/CAT

---

TAPE

D/CDR

HDD

CABLE

ON/STANDBY

DIMMER

ENT

D TUN

SLEEP

10 11 12

INPUT SELECTOR

REMOTE MODE

ZONE2

V2 V3

DTAPE TUNER

DVD

MULTI CH

VOL

SAT

VCR

DVD

RECEIVER

INPUT

CLR

123

456

789

ENTER

DISC

ALBUM

DIMMER

SLEEP

MUTING

Press

[RECEIVER]

ﬁrst

RECEIVER

DIMMER

RECEIVER

MUTING

Using the Sleep Timer

Press the [RECEIVER] button,

and then press the [SLEEP] but-

ton repeatedly to select the

required sleep time.

The sleep time can be set from 90 to 10

minutes in 10 minute steps.

The SLEEP indicator appears on the

display when the sleep timer has been

set. The speciﬁed sleep time appears on

the display for about ﬁve seconds, then

the previous display reappears.

Using Headphones

RECEIVER

SLEEP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR674E Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR674E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info