Bedienungsanleitung Onkyo TX-SR702 (Seite 90 von 96) (Englisch)

645308

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

If you have any trouble using the AV receiver, look for a

solution in this section. If you can’t resolve the issue

yourself, contact your Onkyo dealer.

Can’t turn on the AV receiver?

• Make sure that the power cord is properly plugged into

the wall outlet.

• Unplug the power cord from the wall outlet, wait ﬁve

seconds or more, then plug it in again.

The AV receiver turns off as soon as it’s turned

on?

• The amp protection circuit has been activated.

Remove the power cord from the wall outlet immedi-

ately and contact your Onkyo dealer.

There’s no sound, or it’s very quiet?

• Make sure that all audio connecting plugs are pushed

in all the way (page 21).

• Make sure that the inputs and outputs of all compo-

nents are connected properly (page 21).

• Make sure that the polarity of the speaker cables is

correct, and that the bare wires are in contact with

metal part of each speaker terminal (page 23)

• Make sure that the input source is properly selected

(page 53).

• Make sure that the speaker cables are not shorting.

• Check the volume. It can be set to MIN, 1 through 99,

or MAX (page 53). The AV receiver is designed for

home theater enjoyment. It has a wide volume range,

allowing precise adjustment.

• If the MUTING indicator is shown on the display,

press the remote controller’s [MUTING] button to

unmute the AV receiver (page 54).

• While a pair of headphones is connected to the

PHONES jack, no sound is output by the speakers

(page 54).

• Check the digital audio output setting on the con-

nected device. On some games consoles, such as those

that support DVD, the default setting is off.

•With some DVD-Video discs, you need to select an

audio output format from a menu.

•For the TX-SR602/602E and TX-SR8260, if your

turntable doesn’t have a built-in phono preamp, you

must connect one between it and the AV receiver. If

your turntable uses an MC cartridge, you must con-

nect an MC head amp, or an MC transformer and

phono equalizer.

•For the TX-SR702/702E, if your turntable uses an MC

cartridge, you must connect an MC head amp or an

MC transformer (see page 36).

• Make sure that none of the connecting cables are bent,

twisted, or damaged.

• Not all listening modes use all speakers (page 62).

• Specify the speaker distances (page 48) and adjust the

individual speaker levels (page 50).

• Make sure that the speaker setup microphone is not

still connected.

Only the front speakers produce sound?

• When the Stereo listening mode is selected, only the

front speakers and subwoofer produce sound.

• When the Direct or Pure Audio (not all models) listen-

ing mode is selected, only the front speakers produce

sound.

• Make sure the speakers are conﬁgured correctly

(page 46).

Only the center speaker produces sound?

• If you use the Pro Logic IIx Movie or Pro Logic IIx

Music listening mode with a mono source, such as an

AM radio station or mono TV program, the sound is

concentrated in the center speaker.

• Make sure the speakers are conﬁgured correctly

(page 46).

The surround speakers produce no sound?

• When the Stereo, Direct, or Pure Audio (not all mod-

els) listening mode is selected, the surround speakers

produce no sound (page 62).

• Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

• Make sure the speakers are conﬁgured correctly

(page 46).

The center speaker produces no sound?

• When the Mono, Stereo, Direct, Pure Audio (not all

models), or Orchestra listening mode is selected, the

center speaker produces no sound (page 63).

• Make sure the speakers are conﬁgured correctly

(page 46).

The surround back speakers produce no

sound?

• The surround back speakers are not used with all lis-

tening modes. Select another listening mode

(page 62).

• Not much sound may be produced by the surround

back speakers with some sources.

• Make sure the speakers are conﬁgured correctly

(page 46).

Power

Audio

TX-NR702,602_En.book Page 90 Monday, July 26, 2004 11:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR702 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR702

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info