Bedienungsanleitung Onkyo TX-SR804 (Seite 68 von 96) (Englisch)

645329

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Adjusting the Listening Modes

—Continued

Dolby Digital Settings

■

Dolby EX

This setting determines how Dolby Digital EX signals

are handled. This setting is unavailable if no surround

back speakers are connected or the ZONE 2 SPEAKERS

terminals are being used (page 82).

Auto:

Dolby Digital EX can be selected from

among the Dolby listening modes, and THX

Surround EX can be selected from among the

THX listening modes.

Manual:

You can select listening modes in accordance

with the table on page 61.

■

Late Night

With the Late Night function, you can reduce the

dynamic range of Dolby Digital material so that you can

still hear quiet parts even when listening at low volume

levels—ideal for watching movies late at night when you

don’t want to disturb anyone.

Off:

Late Night function off.

Low:

Small reduction in dynamic range.

High:

Big reduction in dynamic range.

Setting Late Night with the Remote Controller:

The remote controller can be used to set the Late Night

function only when the input source is Dolby Digital.

Notes:

• The effect of the Late Night function depends on the

Dolby Digital material that you are playing, and with

some material there will be little or no effect.

• The Late Night function is set to Off when the AV

receiver is set to Standby.

LFE Level Setting

With this setting, you can set the level of the LFE (Low

Frequency Effects) channel for Dolby Digital, DTS,

MCH PCM (HDMI IN), and MCH Ana (multichannel

DVD input). The level can be set to –

∞

, –20 dB, –10 dB,

or 0 dB (default).

If you ﬁnd that the low-frequency effects are too loud

when using one of these sources, set the level to –20 dB

or –

∞

dB.

Mono/Multiplex Settings

Mono

■

Input Ch

This setting determines which channel is output when

the Mono listening mode is used with a stereo source.

Auto L+R:

Both the left and right channels are output

(default).

Left:

Only the left channel is output.

Right:

Only the right channel is output.

■

Output Sp

This setting determines which speakers output mono

audio when the Mono listening mode is selected.

Front:

Mono audio is output from the front left and

right speakers.

Center:

Mono audio is output from the center speaker

(default).

Multiplex

■

Multiplex

This setting determines which channel of a stereo multi-

plex source is output. Use it to select audio channels or

languages with multiplex sources, multilingual TV

broadcasts, and so on.

Main:

The main channel is output (default).

Sub:

The sub channel is output.

Main/Sub:

Both the main and sub channels are out-

put.

Press the [RECEIVER] REMOTE

MODE button, and then press the

[L NIGHT] button repeatedly to

select: Off, Low, or High.

L NIGHT

RECEIVER

TX-SR804/804E_En.book Page 68 Monday, September 4, 2006 9:34 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR804 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR804

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info