Bedienungsanleitung Onkyo TX-SR804 (Seite 91 von 96) (Englisch)

645329

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

If you have any trouble using the AV receiver, look for a

solution in this section. If you can’t resolve the issue

yourself, contact your Onkyo dealer.

Can’t turn on the AV receiver

• Make sure that the power cord is plugged into the wall

outlet properly.

• Unplug the power cord from the wall outlet, wait 5

seconds or more, then plug it in again.

The AV receiver turns off as soon as it’s turned

• The amp protection circuit has been activated.

Remove the power cord from the wall outlet immedi-

ately. Disconnect all speaker cables and input sources,

and leave the AV receiver with its power cord discon-

nected for 1 hour. After that, reconnect the power cord

and set the volume to maximum. If the AV receiver

stays on, set the volume to minimum, disconnect the

power cord, and reconnect your speakers and input

sources. If the AV receiver turns off when you set the

volume to maximum, disconnect the power cord, and

contact your Onkyo dealer.

There’s no sound or it’s very quiet

• Make sure that the digital input source is selected

properly (page 45).

• Make sure that all audio connecting plugs are pushed

in all the way (page 24).

• Make sure that the polarity of the speaker cables is

correct, and that the bare wire is in contact with metal

part of each speaker terminal (page 21)

• Make sure that the speaker cables are not shorting.

• Check the volume (page 48). The AV receiver is

designed for home theater enjoyment and has a wide

volume range for precise adjustment.

• If the MUTING indicator is shown on the display,

press the remote controller’s [MUTING] button to

unmute the AV receiver (page 58).

• While a pair of headphones is connected to the

PHONES jack, no sound is output by the speakers

(page 59).

• Check the digital audio output settings on the con-

nected device. On some games consoles, such as those

that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an

audio format from a menu.

• If your turntable uses an MC cartridge, you must con-

nect an MC head amp, or an MC transformer

(page 35).

• Check the speaker settings (pages 70–75).

• The input signal format is set to PCM or DTS. Set it to

Auto (page 80).

• If there’s no sound from a DVD player connected to an

HDMI IN, check the DVD player’s output settings,

and be sure to select a supported audio format.

Only the front speakers produce sound

• When the Stereo listening mode is selected, only the

front speakers and subwoofer produce sound.

• In the Mono listening mode, only the front speakers

output sound when the Output Sp setting is set to Front

(page 68).

• Make sure the speakers are conﬁgured correctly

(pages 70, 71).

Only the center speaker produces sound

• If you use the Pro Logic IIx Movie or Pro Logic IIx

Music listening mode with a mono source, such as an

AM radio station or mono TV program, the sound is

concentrated in the center speaker.

• In the Mono listening mode, only the center speaker

outputs sound when the Output Sp setting is set to

Center (page 68).

• Make sure the speakers are conﬁgured correctly

(pages 70, 71).

The surround speakers produce no sound

• When the Stereo or Mono listening mode is selected,

the surround speakers produce no sound.

• Depending on the source and current listening mode,

not much sound may be produced by the surround

speakers. Try selecting another listening mode.

• Make sure the speakers are conﬁgured correctly

(pages 70, 71).

The center speaker produces no sound

• When the Stereo listening mode is selected, the center

speaker produces no sound.

• In the Mono listening mode, only the front speakers

output sound when the Output Sp setting is set to Front

(page 68).

• Make sure the speakers are conﬁgured correctly

(pages 70, 71).

The surround back speakers produce no sound

• The surround back speakers are not used with all lis-

tening modes. Select another listening mode

(page 60).

• Not much sound may be produced by the surround

back speakers with some sources.

• Make sure the speakers are conﬁgured correctly

(pages 70, 71).

• When the ZONE 2 SPEAKERS terminals are used,

playback in the main room is reduced to 5.1-channels,

and the surround back speakers produce no sound

(page 82).

Power

Audio

TX-SR804/804E_En.book Page 91 Monday, September 4, 2006 9:34 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR804 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR804

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info