Bedienungsanleitung Onkyo TX-SR806 (Seite 12 von 124) (Englisch)

63833

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Front & Rear Panels—Continued

a u REMOTE CONTROL

This u (Remote Interactive) jack can be con-

nected to an u jack on another Onkyo AV compo-

nent. The AV receiver/AV amplifier’s remote

controller can then be used to control that compo-

nent. To use u, you must make an analog audio

connection (RCA) between the AV receiver/AV

amplifier and the other AV component, even if they

are connected digitally.

b PHONO IN

This audio input is for connecting a turntable.

c COMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for con-

necting components with a component video out-

put, such as a DVD player, DVD recorder, or DVR

(digital video recorder). They’re assignable, which

means you can assign each one to an input selector

to suit your setup. See “Component Video Setup”

on page 45.

COMPONENT VIDEO MONITOR OUT

This RCA component video output is for connect-

ing a TV or projector with a component video input.

d HDMI IN 1–5 and OUT

HDMI (High Definition Multimedia Interface) con-

nections carry digital audio and digital video.

The HDMI inputs are for connecting components

with an HDMI output, such as a DVD player, DVD

recorder, or DVR (digital video recorder). They’re

assignable, which means you can assign each one to

an input selector to suit your setup. See “HDMI

Input Setup” on page 44.

The HDMI output is for connecting a TV or projec-

tor with an HDMI input.

e MONITOR OUT

The S-Video or composite video jack should be

connected to a video input on your TV or projector.

f IR IN/OUT

A commercially available IR receiver can be con-

nected to the IR IN jack, allowing you to control the

AV receiver/AV amplifier while you’re in Zone 2, or

control it when it’s out of sight, for example,

installed in a cabinet.

A commercially available IR emitter can be con-

nected to the IR OUT jack to pass IR (infrared)

remote control signals through to other components.

g 12V TRIGGER OUT ZONE 2

This output can be connected to the 12-volt trigger

input on a component in Zone 2. When Zone 2 is

turned on on the AV receiver/AV amplifier, a 12-

volt trigger signal is output.

h FM ANTENNA (TX-SR806 only)

This jack is for connecting an FM antenna.

i AM ANTENNA (TX-SR806 only)

These push terminals are for connecting an AM

antenna.

j RS232

This is the RS232 port.

k XM antenna (North American models only)

This jack is for connecting an XM Mini-Tuner and

Home Dock, sold separately (see the separate XM

instructions).

l SIRIUS antenna (North American models

only)

This jack is for connecting a SIRIUS Satellite Radio

antenna, sold separately (see the separate SIRIUS

instructions).

m AC INLET

The supplied power cord is connected here. The

other end of the power cord should be connected to

a suitable wall outlet.

n DIGITAL COAXIAL IN 1, 2, and 3

These coaxial digital audio inputs are for connect-

ing components with coaxial digital audio outputs,

such as CD and DVD players. They’re assignable,

which means you can assign each one to an input

selector to suit your setup. See “Digital Input

Setup” on page 46.

o DIGITAL OPTICAL IN 1 and 2

These optical digital audio inputs are for connecting

components with optical digital audio outputs, such

as CD and DVD players. They’re assignable, which

means you can assign each one to an input selector

to suit your setup. See “Digital Input Setup” on

page 46.

p GND screw

This screw is for connecting a turntable’s ground

wire.

q TUNER IN (TX-SA806 only)

This analog audio input is for connecting a tuner’s

analog audio output.

r CD IN

This analog audio input is for connecting a CD

player’s analog audio output.

s TAPE IN/OUT

This analog audio input and output are for connect-

ing a recorder with an analog audio input and output

(cassette, Mini Disc, etc.).

t GAME/TV IN

Here you can connect a game console, TV, etc.

Input jacks include S-Video, composite video, and

analog audio.

u CBL/SAT IN

Here you can connect a cable/satellite receiver, set-

top box, etc. Input jacks include S-Video, composite

video, and analog audio.

TX-SR806_En.book Page 12 Monday, August 4, 2008 10:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR806 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info