Bedienungsanleitung Onkyo TX-SR806 (Seite 17 von 124) (Englisch)

63833

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Connecting the AV Receiver/AV Amplifier

Speaker Configuration

For 7.1-channel surround-sound playback, you need

seven speakers and a powered subwoofer.

The following table indicates the channels you should

use depending on the number of speakers that you have.

* If you’re using only one surround back speaker, connect it to the

SURR BACK L terminals.

No matter how many speakers you use, a powered sub-

woofer is recommended for a really powerful and solid

bass.

To get the best from your surround sound system, you

need to set the speaker settings. You can do this automat-

ically (see page 51) or manually (see page 75).

Using Dipole Speakers

You can use dipole speakers for the surround left and

right and surround back left and right speakers. Dipole

speakers output the same sound in two directions.

Dipole speakers typically have an arrow printed on them

to indicate how they should be positioned. The surround

left and right

dipole

speakers should be positioned so that

their arrows point toward the TV/screen, while the sur-

round back left and right dipole speakers should be posi-

tioned so that their arrows point toward each other, as

shown.

Connecting a Powered Subwoofer

Using a suitable cable, connect the AV receiver/AV

amplifier’s PRE OUT: SUBWOOFER to an input on your

powered subwoofer, as shown. If your subwoofer is

unpowered and you’re using an external amplifier, con-

nect the PRE OUT: SUBWOOFER to an input on the

amp.

Attaching the Speaker Labels

The AV receiver/AV amplifier’s positive (+) speaker ter-

minals are all red (the negative (–) speaker terminals are

all black).

The supplied speaker cable labels are also color-coded

and you should attach them to the positive (+) side of

each speaker cable in accordance with the above table.

Then all you need to do is to match the color of each

label to the corresponding speaker terminal.

For North American model

• If you are using banana plugs, tighten the speaker ter-

minal before inserting the banana plug.

• Do not insert the speaker code directly into the center

hole of the speaker terminal.

Connecting Your Speakers

Number of speakers: 2 3 4 5 6 7

Front left ✓✓✓✓✓✓

Front right ✓✓✓✓✓✓

Center ✓✓✓✓

Surround left ✓✓✓✓

Surround right ✓✓✓✓

Surround back* ✓

Surround back left ✓

Surround back right ✓

7 8

TV/screen

1. Subwoofer

2. Front left speaker

3. Center speaker

4. Front right speaker

5. Surround left speaker

6. Surround right speaker

7. Surround back left

speaker

8. Surround back right

speaker

Dipole speakers

Normal speakers

Speaker Color

Front left, Zone 2 left White

Front right, Zone 2 right Red

Center Green

Surround left Blue

Surround right Gray

Surround back left Brown

Surround back right Tan

LINE INPUT

Powered

subwoofer

TX-SR806_En.book Page 17 Monday, August 4, 2008 10:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR806 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info