Bedienungsanleitung Onkyo TX-SR806 (Seite 46 von 124) (Englisch)

63833

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

First Time Setup—Continued

If you connect a component to a digital input jack, you

must assign that jack to an input selector. For example, if

you connect your CD player to the OPTICAL IN1 jack,

you should assign that jack to the CD input selector. By

default, the COAXIAL IN1 jack is assigned to the DVD

input selector, although this can be changed.

Here are the default assignments.

Note:

This procedure can also be performed on the AV

receiver/AV amplifier by using its [SETUP] button,

arrow buttons, and [ENTER] button.

Digital Input Setup

Input selector Default assignment

DVD COAX1

VCR/DVR COAX2

CBL/SAT COAX3

GAME/TV OPT1

AUX FRONT

TAPE -----

TUNER

(TX-SA806 only)

-----

CD OPT2

PHONO -----

Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make

sure the appropriate external input is

selected on your TV.

Use the Up and Down [

]/[

] but-

tons to select “1. Input Assign”,

and then press [ENTER].

The “Input Assign” menu appears.

Use the Up and Down [q]/[w] but-

tons to select “3. Digital Audio

Input”, and then press [ENTER].

The “Digital Audio Input” menu

appears.

1. Input Assign

1. HDMI Input

2. Component Video Input

3. Digital Audio Input

1–3. Digital Audio Input

DVD

VCR/DVR

CBL/SAT

GAME/TV

AUX

TAPE

TUNER

PHONO

COAX1

COAX2

COAX3

OPT1

FRONT

- - - - -

OPT2

- - - - -

Use the Up and Down [q]/[w] but-

tons to select an input selector,

and use the Left and Right [e]/

[r] buttons to select “COAX1”,

“COAX2”, “COAX3”, “OPT1”,

“OPT2”, or “- - - - - (analog)”.

• When an HDMI IN is assigned to an

input selector in “HDMI Input

Setup” on page 44, this input assign-

ment is automatically set to the same

HDMI IN. And in addition to the

usual inputs (e.g., COAX1, COAX2,

etc.), you can also select HDMI

inputs. If you change the input

assignment from an HDMI IN to one

of the other inputs (e.g., COAX1 or

COAX2), be sure to set the “Auto-

matic Audio Input Selection Setup”

on page 98 to the same input (e.g.,

COAX1 (Auto) or COAX2 (Auto)).

• “AUX” is used only for digital input

from the front panel terminals. When

HDMI IN is assigned to “AUX” in

the “HDMI Input Setup” on page 44,

the same HDMI IN can be selected.

Examples:

If you connect your DVD player to the

OPTICAL IN 1 jack, set “DVD” to

“OPT1”.

If you want to listen to audio from the

component connected to the OPTICAL

IN 2 jack when the VCR/DVR input

selector is selected, set “VCR/DVR” to

“OPT2”.

If you want to listen to audio from the

component connected to the COAX-

IAL IN 1 jack when the CBL/SAT

input selector is selected, set “CBL/

SAT” to “COAX1”.

For input selectors that you don’t want

to assign a digital input jack, set to

“----- (analog)”.

Press the [SETUP] button.

The setup menu closes.

TX-SR806_En.book Page 46 Monday, August 4, 2008 10:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR806 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info