Bedienungsanleitung Onkyo TX-SR806 (Seite 84 von 124) (Englisch)

63833

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Advanced Setup—Continued

Dimension

With this setting, you can move the sound field forward

or backward when using the Dolby Pro Logic II Music

or Dolby Pro Logic IIx Music listening mode. It can be

adjusted from –3 to +3 (default is 0). Lower settings

move the sound field forward. Higher settings move it

backward.

If the stereo image feels too wide, or there is too much

surround sound, move the sound field forward to

improve the balance. Conversely, if the stereo image

feels like it is in mono, or there is not enough surround

sound, move it backward.

Center Width

With this function, you can adjust the width of the sound

from the center speaker when using the Dolby Pro Logic

II Music or Dolby Pro Logic IIx Music listening mode.

Normally, if you are using a center speaker, the center

channel sound is output by only the center speaker. (If

you are not using a center speaker, the center channel

sound will be distributed to the front left and right speak-

ers to create a phantom center.) This setting controls the

front left, right, and center mix, allowing you to adjust

the weight of the center channel sound. It can be adjusted

from 0 to 7 (default is 3).

■ Neo:6 Music

Center Image

The DTS Neo:6 Music listening mode creates 6-channel

surround sound from 2-channel (stereo) sources. With

this setting, you can specify by how much the front left

and right channel output is attenuated in order to create

the center channel. It can be adjusted from 0 to 5 (default

is 2). This setting is unavailable if no surround speakers

are connected.

When set to 0, the front left and right channel output is

attenuated by half (–6 dB), giving the impression that the

sound is located centrally. This setting works well when

the listening position is considerably off center. When

set to 5, the front left and right channels are not attenu-

ated, maintaining the original stereo balance.

Dolby EX Input Signal Setting

■ Dolby EX

This setting determines how Dolby EX encoded signals

are handled. This setting is unavailable if no surround

back speakers are connected. This setting is effective

with Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only.

T-D (Theater-Dimensional) Listening

Setting

■ Listening Angle

With this setting, you can specify the angle of the front

left and right speakers relative to the listening position.

Processing for the Theater-Dimensional listening mode

is based on this setting. Ideally, the front left and right

speakers should be equidistant from the listening position

and at an angle close to one of the two available settings.

DSD Setting

■ DAC Direct

This setting determines whether or not DSD (SACD)

audio signals are passed through the DSP for A/V Sync,

delay, etc., processing when the Pure Audio or Direct lis-

tening mode is selected.

LFE Level Settings

With these settings, you can set the level of the LFE

(Low Frequency Effects) channel individually for Dolby

Digital, DTS, multichannel PCM, Dolby TrueHD, DTS-

HD Master Audio, and DSD sources. The level can be

set to –

∞, –10 dB, or 0 dB (default).

If you find that low-frequency effects are too loud when

using one of these sources, change the setting to –10 dB

or –

∞ dB.

■ Dolby Digital

Sets the level of the LFE channel for Dolby Digital and

Dolby Digital Plus sources.

■ DTS

Sets the level of the LFE channel for DTS and DTS-HD

High Resolution sources.

■ Multich PCM

Sets the level of the LFE channel for multichannel PCM

sources. (Multichannel PCM is input via HDMI.)

■ Dolby TrueHD

Sets the level of the LFE channel for Dolby TrueHD sources.

■ DTS-HD Master Audio

Sets the level of the LFE channel for DTS-HD Master

Audio sources.

■ DSD

Sets the level of the LFE channel for DSD (SACD) sources.

Auto: If the source signal contains a Dolby EX

flag, the Dolby EX or THX Surround EX

listening mode is used (default).

Manual:

You can select any available listening mode.

Narrow: Select if the angle is less than 30 degrees.

Wide: Select if the angle is greater than 30

degrees (default).

No: DSD signals are processed by the DSP

(default).

Ye s: DSD signals are not processed by the DSP.

30˚

Front right speakerFront left speaker

TX-SR806_En.book Page 84 Monday, August 4, 2008 10:25 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR806 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info