Bedienungsanleitung Onkyo TX-SR8260 (Seite 74 von 96) (Englisch)

645310

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Setup

—Continued

This section explains the items on the Preference menu.

Note:

• This procedure can also be performed on the AV

receiver by using its [SETUP] button, arrow buttons,

and [ENTER] button.

6-1. IntelliVolume

With this preference, you can set the input level for each

input source. This is useful if some of your AV compo-

nents are louder or quieter than others.

While this preference is shown onscreen, you can select

each input source and set the levels while listening to and

comparing them.

If a component is too loud compared to your other com-

ponents, use the Left [ ] button to adjust the level. If it’s

too quiet, use the Right [ ] button.

• The level can be set from –12 dB to +12 dB.

6-2. Volume Setup

■

a. Volume Display

With this preference, you can choose how the volume

level is displayed.

Absolute:

Display range is MIN, 1 through 99, MAX.

Relative:

Display range is –

∞

dB, –81 dB, –80 dB

through +18 dB.

The absolute value 82 is equivalent to the relative value

0 dB.

■

b. Maximum Volume

With this preference, you can prevent the volume being

set too high by specifying a maximum volume level.

When the Volume Display preference is set to Absolute,

the range is from 50 to 99. When it’s set to Relative, the

range is –32 dB through +17 dB. To specify no maxi-

mum volume, select Off.

■

c. Power On Volume

With this preference, you can specify the volume setting

to be used each time the AV receiver is turned on.

When the a. Volume Display preference is set to Abso-

lute, the range is MIN, 1 through 99, or MAX. When it’s

set to Relative, the range is –

∞

dB, –81 dB through

+18 dB.

To use the same volume level that was used when the AV

receiver was turned off, select Last.

The Power On Volume cannot be set higher than the

maximum volume speciﬁed with the b. Maximum Vol-

ume setting.

■

d. Headphones Level

With this preference, you can specify the headphone vol-

ume relative to the main volume. This is useful if there’s

a volume difference between your speakers and your

headphones. The headphone volume can be set between

–12 dB and +12 dB.

Setting Preferences

Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

Use the Up and Down [ ]/[ ]

buttons to select “6. Preference,”

and then press [ENTER].

The Preference menu appears.

Use the Up and Down [ ]/[ ]

buttons to select menu items,

and then press [ENTER].

Use the Up and Down [ ]/[ ]

buttons to select the settings,

and use the Left and Right [ ]/

[] buttons to set them.

The settings are explained below.

When you’ve ﬁnished, press the

[SETUP] button.

The setup menu closes.

RECEIVER

ENTER

------------------------

1.Initial Setup

2.Speaker Setup

Advanced Setup

3.Surround Setup

4.Audio Adjust

5.Listening Mode Preset

6.Preference

Basic Setup

6.Preference

------------------------

2.Volume Setup

3.OSD Setup

4.Remote Setup

5.Digital Format

1.IntelliVolume

ENTER

TX-NR702,602_En.book Page 74 Monday, July 26, 2004 11:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR8260 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info