Bedienungsanleitung Onkyo TX-SR8260 (Seite 91 von 96) (Englisch)

645310

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

—Continued

The subwoofer produces no sound?

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces

no sound.

• Make sure the speakers are conﬁgured correctly

(page 46).

There’s no sound with a certain signal format?

• Check the digital audio output setting on the con-

nected device. On some games consoles, such as those

that support DVD, the default setting is off.

•With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (page 61).

Can’t select the DTS-ES Discrete/Matrix or THX

Surround EX (TX-SR702/702E only) listening

modes?

• These modes cannot be selected when no surround

back speakers are connected, or the Zone 2 speakers

are being used.

Can’t get 6.1 playback?

• If no surround back speakers are connected, or the

Zone 2 speakers are being used, 6.1 playback is not

possible.

The volume cannot be set to 99?

• When the levels of all speakers have been calibrated

(page 50), the maximum volume setting may change.

Noise can be heard?

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work?

• Make sure the source material is Dolby Digital

(page 64).

The DVD analog multichannel input doesn’t

work?

• Check the DVD analog multichannel input connec-

tions (page 29).

•To select the DVD analog multichannel input, press

the [MULTI CH] input selector button.

• Check the audio output settings on your DVD player.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV receiver remains in DTS listen-

ing mode and the DTS indicator remains on. This is to

prevent noise when you use the pause, fast forward, or

fast reverse function on your player. If you switch your

player from DTS to PCM, because the AV receiver

does not switch formats immediately, you may not

hear any sound, in which case you should stop your

player for about three seconds, and then resume play-

back.

•With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV

receiver. This is usually because the DTS bitstream

has been processed (e.g., output level, sampling rate,

or frequency response changed) and the AV receiver

doesn’t recognize it as a genuine DTS signal. In such

cases, you may hear noise.

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

There’s no picture?

• Make sure that all video connecting plugs are pushed

in all the way (page 21).

• Make sure that each video component is properly con-

nected.

• If your video component is connected to a component

video input, your TV must be connected to the compo-

nent video output (page 26).

•

Models other than the TX-SR702/702E, TX-SR602E,

and Australian TX-SR602 do not support video upcon-

version, so composite video and S-Video sources are

not output by the COMPONENT VIDEO OUT.

• On your TV, make sure that the video input to which

the AV receiver is connected is selected.

• While the Pure Audio listening mode (not all models)

is selected, the video circuits are turned off and the AV

receiver outputs no video signals.

The onscreen menus don’t appear?

• Make sure that the video settings are correct

(page 43).

• On your TV, make sure that the video input to which

the AV receiver is connected is selected.

• Depending on the display device, when the “b. Scan

Mode” setting on the “6-3. OSD Setup” menu is set to

Non-Interlaced, the onscreen setup menus may not

appear. If this happens, use the AV receiver’s display

and change that setting to Interlaced.

Video

TX-NR702,602_En.book Page 91 Monday, July 26, 2004 11:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR8260 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info