Bedienungsanleitung Onkyo TX-SR8467 (Seite 73 von 92) (Englisch)

469196

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Advanced Setup—Continued

The Audio Adjust functions are explained below.

Input Channel Settings

■ Multiplex

This setting determines which channel is output from a

stereo multiplex source. Use it to select audio channels

or languages with multiplex sources, multilingual TV

broadcasts, and so on.

Main: The main channel is output (default).

Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are output.

■ Mono Input Ch

This setting speciﬁes the channel to be used for playing

any 2-channel digital source such as Dolby Digital, or 2-

channel analog/PCM source in the Mono listening

mode.

L+R: Both the left and right channels are output

(default).

Left: Only the left channel is output.

Right: Only the right channel is output.

PL IIx Music Mode Settings

These settings provide for playing any 2-channel digital

source such as Dolby Digital, or 2-channel analog/PCM

source in the PLIIx Music listening mode.

■ Panorama

With this function, you can broaden the width of the

front stereo image when using the Pro Logic II Music or

Pro Logic IIx Music listening mode.

On: Panorama function on.

Off: Panorama function off (default).

■ Dimension

With this setting, you can move the sound ﬁeld forward

or backward when using the Pro Logic II Music or Pro

Logic IIx Music listening mode. It can be adjusted from

–3 to +3 (default is 0). Lower settings move the sound

ﬁeld forward. Higher settings move it backward.

If the stereo image feels too wide, or there is too much

surround sound, move the sound ﬁeld forward to

improve the balance. Conversely, if the stereo image

feels like it is in mono, or there is not enough surround

sound, move it backward.

■ Center Width

With this function, you can adjust the width of the sound

from the center speaker when using the Pro Logic II

Music or Pro Logic IIx Music listening mode. Normally

if you are using a center speaker, the center channel

sound is output by only the center speaker. (If you are not

using a center speaker, the center channel sound will be

distributed to the front left and right speakers to create a

phantom center.) This setting controls the front left,

right, and center mix, allowing you to adjust the weight

of the center channel sound. It can be adjusted from 0 to

7 (default is 3).

Neo:6 Music Mode Setting

■ Center Image

The DTS Neo:6 Music listening mode creates 6-channel

surround sound from 2-channel (stereo) sources. With

this setting, you can specify by how much the front left

and right channel output is attenuated in order to create

the center channel. It can be adjusted from 0 to 5 (default

is 2). This setting is unavailable if no surround speakers

are connected.

When set to 0, the front left and right channel output is

attenuated by half (–6 dB), giving the impression that the

sound is located centrally. This setting works well when

the listening position is considerably off center. When

set to 5, the front left and right channels are not attenu-

ated, maintaining the original stereo balance.

Dolby Digital EX Input Signal Setting

■ Dolby EX

This setting determines how Dolby Digital EX signals

are handled. This setting is unavailable if no surround

back speakers are connected.

Auto: If the source signal contains a Dolby Digital

EX ﬂag, the Dolby Digital EX listening mode

is used (default).

Manual: You can select Pro Logic IIx Movie, Pro

Logic IIx Music, Dolby Digital, Dolby Digi-

tal EX, or Dolby Digital+Neo:6.

T-D Listening Setting

■ Listening Angle

With this setting, you can specify the angle of the front

left and right speakers relative to the listening position.

Processing for the Theater-Dimensional listening mode

is based on this setting. Ideally, the front left and right

speakers should be equidistant from the listening posi-

tion and at an angle close to one of the two available set-

tings.

Narrow: Select if the listening angle is 20 degrees.

Wide: Select if the listening angle is 40 degrees

(default).

20/40˚

Front right speaker

Front left speaker

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo TX-SR8467 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo TX-SR8467

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info