Bedienungsanleitung Oplink TripleShield (Seite 1 von 1) (Englisch)

631680

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

STEP

(B) Flash Drive (1)

(A) OPU (1)

(E) IP Camera

(

2 Cameras or 4 Cameras depending on Package)

(F) IP Camera

Power Adapter (

1 per Camera)

Mounng Screws (

4 per Camera)

Screw Anchors (4 per Camera)

(G) Door/Window Sensor (2)

Spacer (2)

Baery (2)

Double-sided Tape (4)

(H) Moon Sensor (1)

Baery (1)

Double-sided Tapes (3)

Congratulaons! You have successfully installed the security system!

Need customer support? Please call us at 1-888-212-2254

or email at Support@OplinkSecurity.com

STEP

• Set up an account with your smartphone

Launch the “Oplink mi Security” applicaon. Follow the instrucons on the applicaon page to

acvate your account using your phone number.

STEP

• Acvaon completed

When you see the “System is ready!” message, your system is ready for use.

Note: Your IP Camera status will be updated aer 10 minutes.

STEP

For complete user manuals and installaon videos, please visit

www.OplinkSecurity.com

Package Contents (for indoor use only)

PT IP Camera

Add on Devices

View more on our webstore

RF Repeater WiFi Smart Plug

Panic Button

Remote Control (2)

Window Decal (3)

* Trigger the Panic Alarm feature

by pressing the Arm buon for

3 seconds

STEP

• Download the Oplink App

Android: Open Google Play Store. Search for “Oplink mi Security” and install the applicaon.

iPhone: Open App Store. Search for “Oplink mi Security” and install the applicaon.

Windows: Open Marketplace. Search for “Oplink” and install the applicaon.

For the latest version of

Oplink Terms and Condions,

please visit our website.

99200090MIG001

STEP

• Power up the IP Camera

Plug the IP Camera into an outlet within 5 feet of the OPU to establish connecon. Once

connecon is established and working, the IP camera can be moved to its desired locaon.

STEP

(E)

(F)

The camera can be moved

and mounted aer the

inial acvaon.

Note: Should the placement of the camera cause the image to be upside-down, use the Flip

feature in the App to correct this maer. Video > Single Video Mode > Image Seng

(I) Siren with Power Adapter (1)

Double-sided Tape (1)

Mounng Screws (2)

Screw Anchors (2)

STEP

(I)

STEP

internet

(B)

(C)

(A)

(D)

• Assemble the OPU staon and connect to a router

Assemble the system according to the provided picture. It is recommended that the OPU be

placed on a 3-5 (0.91-1.52m) high plaorm.

Note: Once the OPU is up and running, to establish proper connecon to it, power up the remaining devices within 5 feet of

the OPU. When connecon is established and working, the devices can be moved to their desired locaons.

TripleShield™

STEP

Setup GuideB

STEP

(Sample QR Code)

Note: When the acvaon

process cannot be completed

normally, the App will ask you

to scan the OPU’s QR code,

located on the back of the

OPU, to connue.

• Start device acvaon on the App

Tap the “Acvate Now” buon.

(Acvaon process takes approximately 2 minutes)

• Power up the Siren

Plug the Siren into an outlet within 5 feet of the OPU to establish connecon. Once connecon

is established and working, the Siren can be moved to its desired locaon. Your Siren comes with

a backup baery pre-installed. To make use of the backup baery, pull and remove the clear

plasc strip to iniate baery contact.

Magnet

Spacer

Sensor

STEP

Router

(not included)

• Install Door/Window Sensor baeries

Each Door/Window Sensor set consists of two pieces. Take the larger piece and with slight force,

push the small tab on the back plate outward and slide the back plate upward. Remove the back

plate and insert a baery into each Door/Window Sensor set. Apply the double-sided tape to each

piece. It is recommended that the Door/Window Sensor be mounted in a vercal/upright posion.

1/4 inch Max

Mount Door Sensor

Note: For the Door/Window Sensor, it does not maer which piece you

place on the frame and which piece you place on the moving part.

To create proper contact, ensure the tops of the two pieces line up.

The Spacer is used in situaons where the smaller piece needs to be

elevated to the larger piece to ensure proper contact.

Mount Window Sensor

(G) Door/Window Sensor

Baery Installaon

(H) Moon Sensor

Baery Installaon

• Place the Moon Sensor

Li the top tab to remove the cover and install the baery into the Moon Sensor. For maximum

coverage, the sensor should be placed in the corner of the room to be monitored and no more

than 7 feet above the ground. The Moon Sensor is most eﬀecve in areas such as hallways and

entry points where possible intruders will have to pass through.

Mount Moon Sensor

(D) OPU Power Adapter (1)

STEP

Inactivity Sensor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oplink TripleShield Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oplink TripleShield

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info