Bedienungsanleitung Oppo BDP-105D (Seite 70 von 100) (Englisch)

637405

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

SET U P M E NU O P T I ONS

with high sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to

48kHz). If you play high resolution audio content at the 480p/576p resolution, you may get

reduced audio resolution, incomplete audio channels, or even no audio/video output at all.

Choosing a higher output resolution such as 720p or above allows enough bandwidth for all

high sample rate audio channels.

3. Coaxial/Optical Output: Allows you to set the audio format and the upper sample rate limit for

coaxial/optic

al (S/PDIF) digital outputs. The upper sample rate limit is used to decide whether the

player will down-sample audio (the player does not up-sample audio to higher sample rates).

• 48k LPCM – Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format, and sets

the maximum sample rate to 48kHz. This is supported by most receivers/amplifiers.

• 96k LPCM – Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format and sets

the maximum sample rate to 96kHz. It can result in better audio quality, but ensure the

recei

ver/amplifier can support it.

• 192k LPCM – Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format and sets

the maximum sample rate to 192kHz. It can result in better audio quality, but ensure the

receiver/amplifier can support it.

• Bitstream (default) – Passes audio as compressed bitstream format to the receiver/amplifier.

Choose this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.

NOTE

Due to copyright restrictions and bandwidth limitations, SACD audio cannot be sent through the

coaxial/optical audio output, and the high resolution audio on DVD-Audio and Blu-ray discs will

be sent out at reduced resolution. Details can be found on page 19.

5. HDCD Decoding: Allows you to set the audio decoding option for HDCD (High Definition

Compatible Digital) discs.

• On – HDCD is decoded by the player. You can enjoy expanded dynamic range and improved

audio resolution.

Auto (default) – The player checks with the device connected to the HDMI output to automatically

determine which audio format (DSD or PCM) to use for SACD playback.

4. SACD Output: Allows you to select the audio output format for SACD playback.

•

DSD – SACD Direct Stream Digital (DSD) data is output over HDMI without any conversion.

For the analogue audio outputs, DSD data is converted into an analogue signal directly by

the internal DAC. If you use a receiver that supports HDMI v1.2a with DSD over HDMI, or

you prefer the sound quality of straight DSD to analogue, please select this option.

PCM – SACD data is converted into multi-channel, high-resolution PCM data. The converted

PCM data is then output t

hrough HDMI or the internal DAC (Digital to Analogue Converter)

for the analogue audio output ports. If you use a receiver that supports HDMI v1.1 to listen to

SACD, please select this option. You may also want to select this option if you prefer the

sound quality of the DSD-to-PCM conversion.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-105D Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-105D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info