Bedienungsanleitung Oppo BDP-105EU (Seite 76 von 96) (Englisch)

637407

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

SETUP MENU OPTIONS

Speaker distance compensation is not required if the A/V receiver has the capability to adjust

channel delay and compensate for speaker distance differences. However, if your receiver does not

have such functions (most receivers do not offer these functions for their multi-channel analogue input),

you may adjust them through the player. Speaker distance delay is only applied if the player is

decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the

bitstream

audio is not adjusted for speaker distance delay.

A typical 7.1-channel speaker layout and their speaker distance measurements are displayed as

below:

SBL SBR

Speaker Icons:

FL - Front Left

FR - Front Right

C - Centre

SW - Subwoofer

SL - Surround Left

SR - Surround Right

SBL - Surround Back Left

SBR - Surround Back Right

Distances:

1 - Listener to Front

2 - Listener to Centre

3 - Listener to Surround Left

In the above diagram, measure the distance (in feet) from the primary listening position to the Front

Left or Front Right Speaker. Enter the distance of the Front Speakers (

in the above picture) into

the Speaker Configuration menu.

Next, measure the distance (in feet) from centre speaker (

) to the listening position. Move the

cursor to highlight the Centre speaker in the Channel Delay setup page, and enter the distance (as

close as possible) in feet. Repeat for each speaker in the system (Centre, Surround Left, Surround

Right, Surround Back Left, Surround Back Right and Subwoofer) as available. The player will insert

appropriate delay to make sure sound waves from different speakers arrive at the listener at the

same time.

It is possible to independently set distances for each speaker. Speaker distances can be set to the

actual spatial distance o

f the speakers.

If the channel delay settings cannot match your speaker configuration, please set all distances to the

same and use your receiver/amplifier to set the channel delay.

3. Trim: The speaker trim level parameters sets the volume of each individual channel. Channel trim

is generally not required since most A/V receivers have the capability to adjust channel trim and

compensate for speaker sensitivity differences. However, if your receiver does not have such

functions (many receivers do not support channel trim for their

multi-channel analogue inputs), you

may adjust channel trim through the player. For most accurate results, it is recommended that you

use test tones from a calibration disc, such as Digital Video Essentials HD Basics, and a SPL

(Sound Pressure Level) metre. The trim level can be set to +/- 10dB in 0.5dB increments.

NOTE

x Increasing the Trim Level above 0dB may result in distortion if the original audio level is

already high. When this occurs the waveform becomes clipped and audible distortion can

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-105EU Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-105EU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info