Bedienungsanleitung Oppo BDP-93 (Seite 68 von 93) (Englisch)

492635

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

SETUP MENU OPTIONS

video. At 480p/576p resolution, the HDMI specification can only support 2 channels of audio

with high sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to

48kHz). If you play high resolution audio content at the 480p/576p resolution, you may get

reduced audio resolution, incomplete audio channels, or even no audio/video output at all.

Choosing a higher output resolution such as 720p or above allows enough bandwidth for all

high sample rate audio channels.

3. Coaxial/Optical Output: To set the output format for the coaxial/optical digital audio output for

use with Dolby Digital and DTS-compatible receivers. The options are:

• LPCM – Forces down-mixed 2-channel digital audio output. Choose this setting if your

receiver/amplifier only supports stereo digital (PCM) audio.

• Bitstream – Passes audio as compressed bitstream format to the receiver/amplifier. Choose

this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.

4. LPCM Rate Limit: To set the maximum Linear PCM output frequency for the coaxial/optical digital

output. This menu item is intended to ensure that the audio output is compatible with equipment

that cannot support high sample rates. It sets an upper limit to decide whether the player shall

down-sample audio. The player does not up-sample audio to higher sample rates. The options

are:

• 48K – Supported by most equipment.

• 96K – Allows a higher sampling rate and frequency response. It can result in better audio

quality. Ensure that the receiver/amplifier can support it.

• 192K (default) – Allows the highest sampling rate and frequency response. It can result in the

best audio quality. Ensure that the receiver/amplifier can support it.

NOTE

On the BDP-93, the “LPCM Rate Limit” can also affect the analog audio performance. Setting to

“192K” may help to get the best analog audio quality.

5. SACD Output: To select audio output format for SACD. The options are:

• PCM – SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-

resolution PCM data. The converted PCM data is then output through HDMI or the internal

DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver that

supports HDMI v1.1 to listen to SACD, please select this option. You may also want to select

this option if you prefer the sound quality of the DSD-to-PCM conversion.

• DSD – SACD DSD data is output over HDMI without any conversion. For the analog audio

outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a

receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of

straight DSD to analog, please select this option.

6. HDCD Decoding: To set the audio decoding option for HDCD (High Definition Compatible Digital)

discs. The options are:

• On – HDCD is decoded by the player. You can enjoy expanded dynamic range and improved

audio resolution.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-93 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info