Bedienungsanleitung Oppo BDP-93 (Seite 86 von 93) (Englisch)

492635

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

REFERENCES

Useful Notes

• In order to prolong the service life of your player, it is recommended to wait at least 30 seconds

before you turn it on again after switching it off.

• Remove disc and turn power off after operation.

• Some functions of the player may not be applicable to certain discs.

• Some discs with special features may not be fully supported by the player. This is not a

malfunction of the unit.

• In the case of player malfunction, please turn it off, wait for 30 seconds

and turn it back on. If

the problem still exists, please follow the troubleshooting instructions or contact an OPPO

service center.

Troubleshooting

Use this chart to resolve general operational problems. If there are any problems that you cannot

resolve, please contact your OPPO service center.

Symptom Possible Cause Solution Reference

Page

No sound Audio cable is not properly

connected

Check audio cable, and then reconnect if necessary. 10 - 17

Mute is activated Press the MUTE button to cancel the mute. 30

Volume is too low Press the VOL + button to increase the volume to 100. 30

SACD is played and the audio

connection is coaxial or optical

digital audio

This is not supported due to copyright restrictions of

SACD. Please use the analog or HDMI audio output.

Alternatively, you may set SACD Priority to CD mode

and the player will play the CD layer.

16, 52

DVD-Audio is played and the

audio connection is coaxial or

optical digital audio

This is not supported due to copyright restrictions of

DVD-Audio. Please use the analog or HDMI audio

output. Alternatively, you may switch to the DVD-

Video playback mode.

16, 52

No picture Video cable is not properly

connected

Check video cable; reconnect if necessary. 10 - 13

TV input is not correctly

selected

Select the input to which the player is connected.

“Pure Audio” mode engaged Press the PURE button to cancel this mode. 42

Video output format is not

support by the TV

Select a proper output resolution that is supported by

your TV.

34-35

Video system is not supported

by the TV

When playback is completely stopped, press and hold

the P/N button or set the correct TV System in the

Setup Menu.

34, 55

No color Video system is not supported

by the TV

When playback is completely stopped, press and hold

the P/N button or set the correct TV System in the

Setup Menu.

34, 55

Saturation set too low Check the saturation setting on TV and player. 59

Loose or damaged component

video cables

If using component output, check that the three cables

are all properly plugged in and not damaged. Make

sure the color of the plugs match the jacks on both

ends.

Incorrect video output port If using composite video output, check that the cable is

not incorrectly plugged into a component video jack.

Incorrect color Incorrect color space setting If using HDMI for video output, check the color space

setting on the TV and player.

Incorrect component video

cable connection

If using component video output, check the three

component video cables to make sure the signals

match on both ends

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-93 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-93

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info