Bedienungsanleitung Oppo BDP-95 (Seite 69 von 94) (Englisch)

492638

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

SETUP MENU OPTIONS

of audio with high sample rate (up to 192kHz), or 8 channels of audio with standard sample

rate (up to 48kHz). If you play high resolution audio content at the 480p/576p resolution, you

may get reduced audio resolution, incomplete audio channels, or even no audio/video output

at all. Choosing a higher output resolution such as 720p or above allows enough bandwidth

for all high sample rate audio channels.

3. Coaxial/Optical Output: To set the output format for the coaxial/optical digital audio output for

use with Dolby Digital and DTS-compatible receivers. The options are:

x LPCM – Forces down-mixed 2-channel digital audio output. Choose this setting if your

receiver/amplifier only supports stereo digital (PCM) audio.

x Bitstream – Passes audio as compressed bitstream format to the receiver/amplifier.

Choose this if your receiver/amplifier can decode Dolby Digital and/or DTS.

4. LPCM Rate Limit: To set the maximum Linear PCM output frequency for the Coaxial/Optical

digital output. This menu item is intended to ensure that the audio output is compatible with

equipment that cannot support high sample rates. It sets an upper limit to decide whether the

player shall down-sample audio. The player does not up-sample audio to higher sample rates.

The options are:

x 48K – Supported by most equipment.

x 96K – Allows a higher sampling rate and frequency response. It can result in better audio

quality. Ensure that the receiver/amplifier can support it.

x 192K (default) – Allows the highest sampling rate and frequency response. It can result in

the best audio quality. However, please ensure your receiver/amplifier can support it.

NOTE

On the BDP-95, the “LPCM Rate Limit” can also affect the analog audio performance. Setting

to “192K” may help to get the best analog audio quality.

5. SACD Output: To select audio output format for SACD. The options are:

x PCM – SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-

resolution PCM data. The converted PCM data is then output through HDMI or the internal

DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver

that supports HDMI v1.1 to listen to SACD, please select this option. You may also want to

select this option if you prefer the sound quality of the DSD-to-PCM conversion.

x DSD – SACD DSD data is output over HDMI without any conversion. For the analog audio

outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a

receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of

straight DSD to analog, please select this option.

6. HDCD Decoding: To set the audio decoding option for HDCD (High Definition Compatible

Digital) discs. The options are:

x On – HDCD is decoded by the player. You can enjoy expanded dynamic range and

improved audio resolution.

x Off – HDCD is treated as regular CD. This is useful when the player is connected to an

HDCD-capable A/V receiver via a digital audio output link (Coaxial, Optical, or HDMI) so the

A/V receiver can perform HDCD decoding.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDP-95 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oppo BDP-95

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info