Bedienungsanleitung Oppo BDT-101CI (Seite 37 von 42) (Englisch)

645873

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

REFERENCES

Useful Notes

 In order to prolong the life of your player, it is recommended that you wait at least 30 seconds

before you power it on after switching it off.

 Remove discs and turn the power off after operation.

 Some functions of the player may not be applicable to certain discs.

 Some discs with special features may not be fully supported by the player. This is not a

malfunction of the unit.

 In the case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If

the problem still exists, please follow the troubleshooting instructions or contact an OPPO

Digital service center.

Troubleshooting

Use this chart to resolve general operational problems. If there are any problems that you cannot

resolve, please contact your OPPO Digital service center.

Symptom Possible Cause Solution

Reference

Page

No audio

Mute is activated Press the MUTE button to cancel the mute. 17

Volume is too low Press the VOL + button to increase the volume to 100. 17

SACD is played and the audio

connection is coaxial or optical

digital audio

This is not supported due to copyright restrictions of

SACD. Please use the analog or HDMI audio output.

DVD-Audio is played and the

audio connection is coaxial or

optical digital audio

This is not supported due to copyright restrictions of

DVD-Audio. Please use the analog or HDMI audio

output.

Input selection is incorrect on

the A/V receiver

Select the input to which the player is connected.

Audio cable is not properly

connected

Check with your Custom Installation professional to

arrange repair service.

No picture

TV input is not correctly

selected

Select the input to which the player is connected.

“Pure Audio” mode engaged Press the PURE button to cancel this mode. 25

Video output format is not

support by the TV

Press the RESOLUTION button multiple times until

“AUTO” is displayed on the front panel

Video cable is not properly

connected

Check with your Custom Installation professional to

arrange repair service.

11-12

“No Disc” or

“Unknown Disc”

error

No disc or incompatible disc

loaded in player

Eject disc and check. 13

Dirty disc recording surface Eject the disc and clean any dirt or fingerprints. 4

Disc not properly loaded

Eject disc and make sure the label side is facing up

and the record side is facing down.

Condensation on the Laser

pick-up head

Turn on the player, eject the disc and leave the player

on for about an hour.

Remote control

failure

Remote control is out of range Use the remote control within the effective range. 9

Low battery Replace the batteries. 9

Incorrect remote control code

Open the disc tray. Aim the remote at the player. Press

and hold the ENTER button on the remote for 5

seconds to set the remote code.

Temporary

function failure

Scratched or damaged disc is

used

Replace the disc. 13

Some functions are not

available during playback

Stop playback completely, then try again. 13

Interference from other devices

Identify interference by turning off other devices, and

then relocate or replace the offending device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo BDT-101CI Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info