Bedienungsanleitung Oppo dv-981 hd (Seite 21 von 55) (Englisch)

137553

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

INSTALLATION

DVD Content

TV Screen Appearance

4:3

16:9

Pan-Scan Letterbox Wide Wide/SQZ

16:9

4:3

Select the Best Output Resolution

One of the major advantages of the OPPO DVD player is its ability to up-convert standard definition video

contents stored on the DVD discs to high definition video signal and output it to the TV through HDMI. The

sophisticated video processor inside the player ensures that the resulted video will have the best possible

color, detail and motion. The DVD player offers several standard and high definition video output resolutions.

To get the best visual result, it is important to select an output resolution that matches your TV or display

device.

The rule of thumb is selecting an output resolution that matches the “native resolution” of your TV or display

device as closely as possible. The “native resolution” is the resolution of the actual display component in the

TV, such as the Plasma panel, LCD panel, or DLP™ chip. The TV may accept input signals with lower or

higher resolutions than its native resolution. In such cases the electronics in the TV will up-scale or down-

scale the video to fit its display component. Unfortunately many TVs on the market only do an average job

scaling the video. On the other hand, if you set the OPPO DVD player to output a resolution that matches or

is very close to the native resolution of the TV, you are more likely to get a great picture. For the latest

generation of 1080p, “Full HD” or “True HD” displays, the best output resolution will naturally be 1080p. For

most flat panels and DLP™, LCD or LCoS (SXRD™, D-ILA™) rear projection televisions this will be 720p. For

CRT rear projection televisions this will likely be 1080i. For non HD displays (very rare if they have HDMI or

DVI) this will be 480p. You may want to try all available output resolutions and select the one that produces

the best picture quality on your TV.

You may use the HDMI button on the remote control to select the output resolution:

1. Make sure the HDMI cable or the HDMI-DVI adapter cable is properly connected.

2. Turn on the TV. Adjust the TV to use the proper input (HDMI or DVI).

3. Turn on the DVD player with no disc in its tray, or if the DVD player is already on, make sure

that playback is completely stopped.

4. Press the HDMI button to show the current output resolution. Each subsequent press of the

HDMI button switches the output resolution in the following sequence:

NTSC output:

480p Æ 720p 60Hz Æ 1080i 60Hz Æ 1080p 60Hz Æ Back to 480p again

PAL output:

576p Æ 720p 50Hz Æ 1080i 50Hz Æ 1080p 50Hz Æ Back to 576p again

5. The selected output resolution will be briefly displayed on the upper left corner of the TV screen

as well as on the DVD player’s front panel display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo dv-981 hd Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info