Bedienungsanleitung Oppo DV-983H (Seite 51 von 70) (Englisch)

492632

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

SETUP MENU OPTIONS

The Setup Menu of the DVD player presents many setup and configuration options. For most users, the

default configuration works well enough and there is no need to change the settings. However if you

need to configure the DVD player to perfectly match your home theater settings and viewing preference,

please refer to the following sections for details about each configuration option. The basics of how to

operate the setup menu system have already been discussed in the “Installation” section of this guide

on page

18.

General Setup Page

TV Display

Border Level

Screen Saver

Background

Dimmer Control

OSD Mode

Angle Mark

SACD Priority

-- General Setup Page --

16:9 Wide

Default

Normal

Off

Multi-Channel

1. TV Display: To set the aspect ratio of the player’s output image to match your TV. The options

are :

• 4:3 Pan/Scan – Choose when the display is 4:3. Widescreen image will be stretched.

• 4:3 Letterbox – 4:3 TV Letterbox. Choose when the display is 4:3. Widescreen image is

displayed in “letterbox” format with black borders on top and bottom.

• 16:9 Wide – Choose when the display is 16:9. 16:9 materials will be displayed in its native

aspect ratio, and 4:3 materials will be stretched.

• 16:9 Wide/Auto – 16:9 TV Wide/Auto Pillarbox Mode. Choose when the display is 16:9.

16:9 materials will be displayed in its native aspect ratio, and 4:3 materials will be displayed

with black borders on both sides to maintain 4:3 aspect ratio.

2. Border Level: To set the brightness level of the border area when borders are inserted by the

DVD player to maintain correct aspect ratio. The default level is 0, which corresponds to total

black. If you set it to 3 or 4, the bars become grey instead of black. This setting may be useful

for users with Plasma or CRT TVs that are sensitive to “burn-in” issue. A grey border setting

allows the phosphor in the bar area to be moderately used, and can alleviate the burn-in

problem. The Border Level setting only applies to the HDMI output, and only affects borders

inserted by the DVD player. If the borders are encoded in the original video, the border

brightness level will not be affected by this setting.

3. Screen Saver (on/off): To turn on/off the screen saver function. When the screen saver is on,

video output will be turned off after 2 minutes of inactivity. This is designed to minimize the

burn-in issue for plasma and CRT display devices. Many projectors and LCD TVs will go into a

standby or sleep mode and turn off their projection lamp or LCD backlight lamp, thus save

energy and prolong the lamp life. When you press any button on the OPPO remote control or

player front panel, the screen saver will be cancelled and video output will be restored. If your

TV is already in standby or sleep mode, you may need to wake up the TV by pressing a button

on its remote or control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo DV-983H Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info