143165
2
Zoom out
Zoom in
Vorherige Seite
1/58
Nächste Seite
TFT-LCD TV
READ CAREFULLY
BEFORE OPERATION
USER MANUAL
LT-1505DT
WWW.OPPO.SE
WWW.OPPO.SE
LT1509
LT-1505DT
Before connecting the AC power cord to the DC adapter outlet ,make sure the
voltage designation of the LCD TV corresponds to the local electrical supply .
If you are unsure of your power supply , ask your local power company .
Never insert anything metallic into the cabinet openings of the liquid crystal
display (LCD)TV/monitor;otherwise it may create the danger of electric shock.
To avoid electric shock, Never touch the inside of the LCD TV/monitor and
adapter. Only a qualified technician should open the case of the LCD TV/
monitor/adapter.
Never use your LCD TV/monitor/adapter if the power cord has been damaged .
Do not allow anything to rest on the power cord, and keep the cord away from
place where people can trip over it .
Be sure to hold the plug, not the cord, when disconnecting the adapter from an
electric socket.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
TO PREVENT ELECTRICAL SHOCK.
DO NOT REMOVE THIS COVER. NO
USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates
dangerous voltage
inside the product that
presents a risk of electric
shock or personal injury.
This symbol indicates
important instructions
accompanying the
product.
Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked or covered. Also,
avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing
so may block the ventilation openings in the bottom of the cabinet. If you put the
LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide
adequate ventilation.
Do not expose the LCD TV/monitor to extreme temperature conditions or to
extreme humidity conditions.
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket,
table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do
not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol,
toluene, ethy lacid, methyl, or chloride-these may damage the panel.
Locate your DC adapter near an easily accessible AC outlet.
If your LCD TV/monitor does not operate normally in particular, if there are
any unusual sounds or smells coming from it unplug it immediately and
contact an authorized dealer or service center.
High temperature can cause problems. Don`t use your LCD TV/monitor in
direct sunlight, and keep it away from heaters, stoves, fireplaces, and other
sources of heat.
Unplug the DC adapter when it is going to be left unused for an extended
period of time .
To reduce the risk of fire or electric shock, and annoying interference, use
the recommended accessories only.
If the LCD TV/monitor is broken, do not try to repair it yourself. Contact
qualified service personnel.
Unplug your DC adapter from the AC outlet before any service.
Be sure the service technician uses authorized replacement parts or their equi-
valents. Unauthorized parts may cause fire, electrical shook, or other hazards.
Following any service or repair, be sure the service technician performs safety
checks to certify that your TFT-LCD TV/monitor is in safe operating order.
The apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
DVD OPERATION
Brief introduction
22
Comparison between DVD
and other discs
22
Function introduction
22
Features
23
Compatible disc types
24
Playback
25
Volume control
25
CONTENT
AV, S-VIDEO , SCART AND YPbPr SETUP
Video setting menu
17
VGA SETUP
Picture
Sound
Monitor setting
Function
18
20
19
21
TELETEXT FUNCTION
Teletext display
Mix mode
Page selection
Lock
Zoom in teletext
16
Index
Display mode
16
Colorized buttons
16
15
15
15
15
15
EXTERNAL EQUIPMENT
Connecting figure
4
LET'S START
Change source operation
8
REMOTE CONTROLLER
Remote buttons
5
Battery installation
7
TV MENU SETUP
Picture
Sound
TV setting System setting
Nicam/bilingual receiving
14
9
10
11
13
PANEL BUTTON FUNCTIONS
Front panel
2
Left panel
2
3
Right panel
Rear panel
3
INSTALLATION
Normal installation
1
CONTENT
DISPLAY MODE
51
Display mode
SPECIFICATIONS
Specifications
50
TROUBLE SHOOTING
DVD troubleshooting
49
Display troubleshooting
Sound and TV troubleshooting
48
48
DVD FUNCTION SETUP
General setup
35
36
Initial setup
Video setup
36
Audio setup
35
Speaker setup
35
TIME SETTINGS
Time setting
40
CARD READER AND USB OPERATION
Usage of USB equipment
and 3-IN-1card reader
38
DVB OPERATION
General setting
42
Adanced setting
43
Auto search
44
Manual search
45
Channel setting
46
EPG
47
DVD OPERATION
Repeat playback
29
Select language/audio
28
Repeat playback of selected segment
29
34
MPEG4 and JPEG file playback
Zooming the displayed frame
31
Play from the desired position
30
Fast playback
30
VCD, SVCD menu playback
26
Direct play
27
Select track to play directly
by number button
28
Memory
27
1, Hook the tache (labeled A)of the kickstand on to the slot (labeled C)
2, Tighten the screws ( M5 28) through the ostium (labeled B).
3, Figure shows the finished installation.
Kickstand
Ostium
M5 28
Screw 1pcs
Rear viewing of LCD TV
1
1
1
INSTALLATION
NORMAL INSTALLATION
A
B
C
1
PANEL BUTTON FUNCTIONS
RIGHT PANEL
3
USB jack
MEDIA CARD socket
STOP button
HEADPHONE jack
REAR PANEL
EJECT button
PLAY/PAUSE button
YPbPr or YCbCr input terminal
1
2 3
Composite video/audio and
S-VIDEO audio input
2
PC audio and YPbPr audio input
3
4 5
Coaxial digital audio output
4
S-VIDEO input
5
6
SCART connecting terminal
6
7
R input terminal
F
7
VGA input terminal
8
8
rr
bb
9
12V DC input terminal
9
EXTERNAL EQUIPMENT
4
NOTE
CONNECTING DIAGRAM
You should insert all interconnecting cables BEFORE plugging in the power cord.
Power amplifier (with coaxial digital audio in)
DVD or VCR player
RL
23
4
5
6
7
89
1
0
REMOTE CONTROLLER
5
REMOTE BUTTONS
EJECT
1
Disc in/out (valid in DVD mode).
Number button
5
To select program number.
OK button
9
To confirm the selections.
17
INDEX/PAGE+
To display main content page when playing the
teletext /Change to the program in next page.
18
SUBPAGE/PAGE-
To display the subpage of the teletext/Change
to the program in previous page.
19
REVEAL/EPG
Display the hidden teletext information
/ (valid in
DVB mode )
To display the program guide
.
20
ZOOM/CYAN
To zoom in and zoom out to the picture
(valid in DVD mode)/CYAN button.
SETUP
11
TV or DVD function setup.
DISC MENU
12
To go to the DVD main menu (valid in DVD
mode).
LANGUAGE
To switch the output language or channel (valid
in DVD mode).
14
15
CARD/DISC
Switches between the card reader, DVD or
USB mode (valid while in DVD mode).
1
2
3
4
5
8
9
15
13
11
18
14
7
10
6
12
16
17
19
20
21
7
To display the calendar and settings for timer
of power on/off .
TIMER
13
CHANNEL+/-
To increase or decrease program number,
(valid in TV and DVB mode).
To play normally or pause playing.
[ ] button
2
3
To fast-forwards DVD playback (valid in DVD
mode).
[ ] button
[ ] button
4
To select the next chapter or track.
DVB MENU
8
To enter or
.
return to the previous DVB menu
and screen
10
Left/Right cursor(menu adjustment )
To move leftward/ rightward or adjust the
selected item in the menu, or adjust sound
volume (invalid in DVD and DVB mode).
16
HOLD/TV/
To stop teletext on current page/Switch between
TV and radio modes (valid in DVB mode).
21
REPEAT/YELLOW
To repeat playback (valid in DVD
mode)/YELLOW button.
6
RETURN
To exchange channel between the previous
program and the current program (valid in TV
or DVB mode).
LT-1505DT
23
4
5
6
7
89
1
0
6
REMOTE CONTROLLER
SOURCE
To select input source: TV, DVB, DVD,AV,
S-VIDEO,SCART, YP
BPR and VGA.
27
UP/DOWN cursor
To select upward/downward in the menu or
change the channel (valid in TV and DVB mode).
28
To display TV and teletext in the same time/
Selects the subtitle language (valid in DVD
and DVB mode).
MIX/SUBT
35
SIZE/INFO
To magnify teletext page/
valid in DVD and DVB mode).
To display the
information about channel and program
(
37
Volume +/-
31
To increase or decrease sound volume.
To play from a certain time point
(valid in DVD mode)/RED button.
GOTO/RED
38
23
22
24
25
27
28
29
26
TEXT/TEXT
34
To enable or disable the function of teletext.
A-B/GREEN
To segment repeat (valid in
DVD mode)/Green button.
39
DISPLAY
To display current source information.
29
32
FAVORITE/Q-PLAY
Display your favorite channel list, valid in DVB
mode /Play DVD directly in DVD mode.
38
31
30
32
STANDBY
22
To switch between standby mode and power-on
mode.
39
37
36
34
35
33
[ ] button
To fast backward playback( valid in DVD mode).
23
26
TWO-DIGIT NUMBER BUTTON
To switch between one or two-digit program
number.
24
[ ] button
To select the previous chapter or track (valid in
DVD mode).
MUTE
Sound mute switch.
30
NICAM/CAP.
33
Switch in NICAM, A2 and mono channel(It is
effective in TV signal input with NICAM or A2
function) / Capture the currently played image
and set it as the power-on logo in DVD mode.
CANCEL/AUDIO
To cancel teletext/
valid in DVB
mode )
To change the audio
language and sound track (
.
36
25
[ ] button
To stop playing (valid in DVD mode).
LT-1505DT
7
REMOTE CONTROLLER
Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment, as follows:
BATTERY LIFE
Generally speaking, the battery may be used for one year, but the battery life is also
related to the usage times and remote controller operation.
If the remote controller is still invalid when very near to the remote sensor window, please
replace the battery.
Please use SUM-4(AAA) battery.
NOTES
Never use rechargeable battery.
Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.
Pay attention not to fall or knock the remote controller, which will cause damage or
function failure to it.
Do not use new and old battery together.
If electrolyte splashes into body, please clean it with water.
CAUTION
Please put battery in the place children cannot touch. If swallow by accident, please
contact with the local doctor immediately.
BATTERY INSTALLATION
When not using the remote controller for a long time, please take out battery to avoid
liquid leakage. Before replacing new battery, please clean the electrolyte in the remote
controller.
LET'S START
You can change input source by using Source Menu. Press [SOURCE] button or [SOURCE]
key to show the menu as follows:
The current source item is highlighted. Through press [ ] button on the remote control
or [ CH+/CH- ] key on the left side of LCD TV to select your desire, Press [ ] button,
[VOL+/VOL-] key or [OK] button to confirm your choice .
CHANGE SOURCE OPERATION
TV
DVB
DVD
AV
S-VIDEO
SCART
YPBPR
VGA
8
INDICATOR
STANDBY
STANDBY
POWER
After the unit has been suitably placed / fixed, on the desk or on the wall, and all leads are
connected for power, input and output etc, what you should do next is:
1, Press the power switch on the top left corner. The unit will go into standby mode - you will
see the LED indicator turn red .
2. Press the STANDBY key on the left side of the TV, or [STANDBY] button on the remote
control to make the unit switch to power-on mode - you will see the LED indicator turn
green. Now you can enjoy the many features of your new OPPO product.
Item
BRIGHTNESS
To adjust brightness.
CONTRAST
To adjust contrast.
SATURATION
To adjust color saturation.
This product can store up to 100-channel programs (0 99). You can select your
favorite channel through [CH+/-] or number buttons, and you can scan and store
all of the channels through manual or automatic mode.
In TV mode, press [SETUP] button into the main menu and the main menu will show as follows:
Through pressing [ ] button on the remote control,
you can select main menu sections(main menu
sections consist of
. Press
[ ] or [OK] button to enter this menu section.
" PICTURE " , " SOUND " ,
" TV SETTING " , " SYSTEM SETTING ")
Press [ ] button on the remote control to select
the item, and then press [ ] button to adjust
parameter value. Press [SETUP] button to return
to main menu sections.
Select " " and menu will show as follows:
Press [ ] button to select items and [ ]
button to adjust.
TV MENU SETUP
Description
SELECT RETURN
SETUP
TINT
PICTURE
BRIGHTNESS
SATURATION
CONTRAST
50
40
50
50
TINT
To adjust picture tint, only valid in N 3.58/N 4.43/PAL60 and display
mode with V-scanning frequency equal 59.94 (please refer to P52).
9
PICTURE
SELECT RETURN
SETUP
TINT
PICTURE
50
SATURATION
CONTRAST
40
50
BRIGHTNESS
50
ENTER
OK
ADJUST
PICTURE USER
PICTURE USER
PICTURE
Can be change between : "USER ", "STANDARD ", " DYNAMIC "
and "SOFT ".
Item
BALANCE
TREBLE
To adjust balance of left and right channels.
To adjust bass.
To adjust treble.
Press [ ] select " " and press [ ] or [OK] button to enter the following section:
TV MENU SETUP
BASS
Description
SOUND
Can be change between USER , NEWS , FILM
MUSIC .
" " "STANDARD"," " " "
and " "
10
SOUND
Press [ ] button to select item and press [ ] button to adjust . The following is sound
item description.
50
BASS
40
BALANCE
34
TREBLE
SOUND
SELECT RETURN
SETUP
ENTER
OK
SOUND USER
BBE VIVA
OFF
BBE VIVA
To adjust BBE mode(with bass and treble invalid)
TV MENU SETUP
11
Press [ ] button to select item and press [ ] button to adjust or activate.
Item
CHANNEL
To change the channel number.
CHANNEL EDIT
FINE TUNE
To adjust the channel frequency accurately to make the sound
and picture effect better.
MANUAL SEARCH
To scan programs by manual.
Description
AUTO SEARCH
To scan programs and store all of them automatically.
press [ ] select " " item and press [ ] or [OK] button to enter the following section:
TV SETTING
CHANNEL
5
CHANNEL EDIT
FINE TUNE
168.90MHZ
MANUAL SEARCH
AUTO SEARCH
SELECT
RETURN
SETUP
TV SETTING
NOTE
During the searching, you can press [SETUP] button to stop.
ENTER
OK
To enter a submenu to set channel skip and channel swap.
Please refer the next page.
CHANNEL EDIT
SKIP
SWAP
OK
CHANNEL
5
NO
?
__
Item
CHANNEL
Description
SKIP
SWAP
OK
To select current channel here.
To select "Yes " or "No ", you can select "Yes " to make current
channel unaccessible while using [CH+/-] button to browse
channels.
Select or enter the channel number directly to swap with current
channel.
Highlight this option and press the [OK] button to confirm the swap
function.
12
TV MENU SETUP
15
Compatible Disc Types
CD-DA: Digital audio
12cm
12cm
VIDEO CD: Compressed digital audio + compressed digital video (dynamic picture)
DIGITAL VIDEO
12cm
SVCD: Compressed digital audio + compressed digital video (dynamic picture)
12cm
DVD: Compressed digital audio + compressed digital video (dynamic picture)
12cm
MPEG4: Compressed digital audio + compressed digital video (dynamic picture)
MPEG4
NOTE: * Some discs labelled with MPEG4 on the market actually are *.rm/*.ra/*.ram/*.rmm and others
which are not compatible. Please take care when buying discs.
Super compatible with VCD, SVCD, CD, HDCD, KODAK PICTURE CD etc.
DVD OPERATION
Multi-level zoom in/out playback function to provide you with brand-new enjoying way.
2
Multiple aspect ratios to fit TV sets of various screen ratios.
3
Parental lock function to prevent children from watching unsuitable discs.
4
Multiple dubbing languages and subtitle languages bring you the best entertainment status
all the time.
5
NOTES
These icons on the top banner indicate the disc types that the function described in the section applies to.
Applies to VCD disc
VCD
Issues related to
CDVCDSVCDDVD
Applies to CD disc
CD
Applies to DVD disc
DVD
MPEG4
Applies to SVCD disc
SVCD
Applies to MPEG4 disc
MPEG4
Types
Sizes
Recorded Contents
24
This model do not support the 8cm disc. Do not insert that type of disc into this device
to prevent disc jam.
This model support DIVX playback, but with datarate of up to 10Mbps.
2. Place the disc (with label side facing users) to the door and the unit will draw in the disc
automatically.
1. Power on and switch signal source to DVD mode and the unit begins to work.
3. Press [PLAY] button to begin playing disc.
4. Press [STOP] button to stop playing.
6. When finishing playing, switch signal source to other working state and press [ ]
button to make the unit enter standby state. Please pull out the power plug from power
socket when not using the unit for a long time.
PLAYBACK
The unit begins to read disc information.
CDVCDSVCDDVD
MPEG4
5. Press [ ] button to take out disc.
EJECT
STANDBY
PLAY
STOP
DVD OPERATION
25
When the unit playing a disc, press[ ] button the firs time and the unit enters pause state, while
press [ ] button again and the unit resumes playback.
When the unit is playing a disc, press [ ] button the first time and the unit enters pre-stop state,
while press [ ] button again and the unit enters stop state.
At the pre-stop state, if you press [ ] button, the unit will continue to play from the stopped point.
At the stop state, if you press [ ] button, the unit will play from the beginning point of the disc.
Press [ ] button when playing MPEG4 discs and the unit enters stop state directly.
[EJECT] button is effective only when selecting DVD signal source. In other signal source ,such
as TV, AV, etc, this button is invalid.
2. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.
CDVCDSVCDDVD
1. Press [VOL+/VOL-] buttons to adjust volume.
MPEG4
VOLUME CONTROL
VOL
+
VOL
-
VCDSVCD
When playing SVCD, VCD2.0 discs with menu playback function, you may enjoy simple menu
playback alternation function. You may set menu playback state in the setup menu and select
menu playback or sequence playback.
For instance, VCD 2.0 disc menu playback.
VCD, SVCD MENU PLAYBACK
DVD OPERATION
26
2. After entering main menu 1, TV screen displays submenu.
2.
3.
4.
5.
1.
3. Press [ ], [ ] buttons to turn pages.
4. Press number buttons to select submenu content. For instance, press number button 5
and the unit begins to play the fifth track.
2.
3.
4.
1.
5.
5. When playing, pressing [DISC MENU] button to return to the root menu.
1. TV screen displays main menu.
Press number buttons to select. For instance, press number button 1 to select main menu 1.
1.
2.
1.
2.
23
4
5
6
7
89
1
0
DISC MENU
OK
PLAY
DVD OPERATION
27
Direct play is a creative function that very helpful for users to enjoy DVDs. With direct
play function, you can play DVD directly, skipping the legal warning, advertisements,
chapter selection and other thing that come before the movies start. You can enjoy pure
movies without bothering.
When the disc is loaded and the legal warning, advertisements, chapter selection
message shows, just press [ ] button to activate direct play function and start
a pure movies playback.
DIRECT PLAY
DIRECT PLAY
When you are enjoying VCD with PBC function, direct play can disable the PBC and VCD
will be played in sequence.
NOTE
MEMORY
DVD
NOTE
1. This player can save the currently played time point automatically when you leave the current
DVD disc playback (switch from DVD to card read state, switch from DVD signal source to
other signal source, enter standby state in DVD mode).
2. When switching to DVD playback state again, this player can automatically search the time point
saved last time to continue playing. If you want to play from the beginning, please press [STOP]
button twice and then press [PLAY] button.
This player may save one DVD disc for one time.
The DVD disc played the last time will be saved, and the former saved contents will be cleared
by new saved contents.
lf power is cut off unexpectedly, the DVD disc played currently will not be saved.
23
4
5
6
7
89
1
0
As for VCD or CD disc with multiple channels, you may select audio output from left or right
channel or select stereo audio output. For VCD disc, left channel records dubbing and right
channel records singing, and you may select left channel for dubbing.
VCD, CD disc:
Mono Right
Mono Left
Stereo
Language type varies with disc recording.
When playing some DVD discs, pressing [LANGUAGE] button to switch language may
result in playing the track from its beginning.
For VCD story disc with double languages, you may press [LANGUAGE] button to select
the desired language.
NOTE
DVD disc:
1. Press [LANGUAGE] button.
CDVCDSVCDDVD
As for DVD and SVCD discs with multiple languages, you may select the desired language
when playing.
Audio 1/2
French
Audio 2/2
Chinese
SVCD disc:
Audio 2
Audio 3
Audio 1
Audio 4
SELECT LANGUAGE/AUDIO
DVD OPERATION
28
SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS
CDVCDSVCDDVD
1. Insert disc, after disc reading and normal playback, press number buttons to select track
to play directly.
1 + 6
6
-/--
If track number is less than 10, press number buttons 1 to 9 to directly select. For instance,
select the seventh track:
7
For instance, select the 16th track
If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.
If track number is more than or equal to 20, press [-/- -] button twice and then number buttons
0 to 9. The rest can be performed by analog.
NUMBER
LANGUAGE
The A-B repeat function may be invalid to some discs. In menu playback mode, the segment
can only be selected in the track.
3. Press [A-B] button for the third time.
The unit restores to normal playback.
NOTE
When playing disc, you may press [A-B] button to play your desired segment content repeatedly.
1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that
you desire to play repeatedly.
TV screen displays:
A
2. In normal playback, press [A-B] button at the ending point (point B) of the segment that
you desire to play repeatedly.
TV screen displays:
AB
The unit automatically returns to point A and begins to play the selected segment (A-B).
CDVCDSVCDDVD
MPEG4
REPEAT PLAYBACK OF SELECTED SEGMENT
To SVCD, VCD2.0 discs, the repeat function cannot be operated in menu playback mode.
1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions.
The repeat playback function enables a certain title/chapter/track/disc repeated.
DVD DISC:
SVCD, VCD, CD discs:
To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1,
CD discs, the repeat function may be directly operated.
Track Repeat Off
ALL
Repeat Off
TitleChapter
ALL
CDVCDSVCDDVD
MPEG4
REPEAT PLAYBACK
DVD OPERATION
29
A-B
REPEAT
1. Search title and chapter. For instance, search the 2nd chapter in title 6.
Inputting a certain time, title number or chapter number directly may search in the disc fast and
then play forward from this position.
Play DVD disc
DVD SVCD VCD CD
MPEG4
1. Press [ ] button and the unit begins fast forward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly:
2. Press [ ] button and the unit begins fast backward playback.
Press [ ] button each time and the disc playback speed switches in the following sequence
circularly:
PLAY FROM THE DESIRED POSITION
When playing discs, you may select fast forward or fast backward playback to search a certain
point.
CDVCDSVCDDVD
MPEG4
FAST PLAYBACK
2X
16X32X
8X
4X
2X
16X32X
8X
4X
DVD OPERATION
30
Then press number button 6 to select Title 6, shown in the figure:
Title 06 /30 Chapter /02
2. Search title time
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
Title 06/30 Time : :
Finally press number button 2 to select Chapter 2, shown in the figure:
Title 06 /30 Chapter 02/02
Press [GOTO] button and TV screen displays:
Press [ ] button to move cursor and lighten the title number, shown in the figure:
Title 03/30 Chapter /02
Title /30 Chapter 01/02
3. Search chapter time
Press [GOTO] button until TV screen displays the following figure. Then press number buttons to
input hour, minute and second.
Chapter 01/04 Time : :
JPEG(Joint Photographic Experts Group) is the most widely used picture compression and
storage format today. Utilizing high efficiency compression algorithm, JPEG compresses the original
picture 15 to 20 times with excellent picture quality. JPEG is featuring small size data, convenient
application and supported by most picture processing software, so it is very fit to store photos.
The strong decoding capability of this unit can decode and play the files with the above formats.
In the course of playing, an operation menu will appear and its construction is shown as follows.
2
DIR window
Display the current path.
Display the current state
information.
1
State window
4
Scroll bar window
Indicate the current file's position.
Display the current path's
file.
3
File window
5
Preview window
JPEG image preview.
6
Information window
Display the current operation
prompts.
The state information in state window is as follows:
4
00:57
002/073
03:31 128
2
1
3
5
6
Elapsed playback time
1
Total playback time
2
The audio bit rate (generally the bit rate is 128kbps,
sometimes it is VBR.)
3
Current playback mode indicator
4
Track indicator
5
6
Dynamic frequency spectrum indicator
00:00 00:00
004/369
\PIC\
Du000
Du001
Du002
..
1
2
3
4
5
6
MPEG4 AND JPEG FILE PLAYING
MPEG4 is the audio standard published by MPEG(Moving Pictures Experts Group) in November,
1998. As the discrepant parts between frames of picture are only processed and the same parts are
deleted, the data number are greatly decreased. The most distinct feature of MPEG4 is the high
compression and clear imaging. Furthermore, MPEG4 provides elastic specifications to adjust the
stream according to the used requirements. The larger stream can be used when collecting private
films; and the small stream can be used in network transferring, which make MPEG4 use widely.
DVD OPERATION
32
SET TIME
YEAR
MONTH
DATE
HOUR
MINUTE
05
04
03
12
21
40
TIME SETTINGS
At any display mode you press [TIMER] button, calendar will show on the screen,
Use [ ] button to choose which value to change and use [ ] button to change it. When new
value is set, press [TIMER] or [OK] button to exit and the value will be saved immediately.
TIME SETTING
CALENDAR
2005-04-03 12:13:35
SUN MON TUE WED THU FRI SAT
1
2
3
4
5
678
9
10
11
12
13 14 15
16
17
18
19
20 21 22
23
24
25
26
27 28 29
30
SET TIME
SET TIMER ON
SET TIMER OFF
Item
Description
SET TIME
SET TIMER ON
SET TIMER OFF
Press [ /OK] button to go to the set time sub menu.
With TIMER ON function, you can waken on this unit at a certain time from standby mode.
You can go into SET TIMER ON sub menu by pressing [ /OK] button when cursor pointing
at SET TIMER ON .There are 3 items in this sub section.
""
""
""
Press [ /OK] button to go to the set timer on sub menu.
Press [ /OK] button to go to the set timer off sub menu.
You can set two timers for power on. That means you can power
on your LCD TV two times a day automatically.
You can set the hour and minute for auto power on here.
HOUR 1 and MINUTE 1 set for the TIMER 1 for auto power on,
ACTIVATE 1 can be set for activate setting for TIMER 1.
You can choose ON/OFF and ONCE on ACTIVATE 1.
When ON is selected, timer 1 will always enable auto powering on .
When you select OFF ,timer function will be disable .If you select
"ONCE", timer 1 will enable auto powering on and, after it powers
on automatically for the first time, the setting will go to "OFF" automatically.
SET TIMER ON
HOUR 1
MINUTE 1
ACTIVATE 1
00
00
OFF
HOUR 2
MINUTE 2
ACTIVATE 2
00
00
OFF
SET TIMER OFF
HOUR
MINUTE
ACTIVATE
00
00
OFF
With TIMER OFF function, this unit can power off by itself at a certain time from working mode.
You can go into SET TIMER OFF sub menu by pressing [ / /OK] buttons when cursor
pointing at SET TIMER OFF .There are 3 items in it .
You can set the hour and minute for auto powering on here
And you can set the TIMER OFF function activate option
here. You can choose ON/OFF and ONCE here.
When ON is selected, timer will always enable auto powering off . When users select OFF ,
timer will disable powering off .
""
""
""
""
""""
"" " "
TIME SETTINGS
41
NOTE
When you have set the "TIMER OFF" activated, a message will show when it is 1 minute
left for powering off like:
" STANDBY : 59S" . If you press [ TIMER] button during this
status, you can cancel the power off this time. When the number is decreased to 0, this
unit will go to standby mode automatically .
If you select "ONCE", timer will enable auto powering off and, after it powers off automatically for
the first time, the setting will go to "OFF" automatically.
When you set the ACTIVATE ON or ONCE, and the calendar's time comes to the timer's
value, power on and power off event will occur; For example: If you set the POWER ON
TIMER to 9:00, ACTIVATE ON, then when time in calendar goes to 9:00, this unit will power
on from standby mode automatically.
HOUR 2 and MINUTE 2 set for the TIMER 2 for auto power on ,ACTIVATE 2 can be set for activate
setting for TIMER 2.
You can choose ON/OFF and ONCE on ACTIVATE 2.
When ON is selected, timer 2 will always enable auto powering on . When you select OFF ,timer
function will be disable .If you select "ONCE", timer 2 will enable auto powering on and, after it
powers on automatically for the first time, the setting will go to "OFF" automatically.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oppo lt 1505dt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info