Bedienungsanleitung Oppo UDP-205 (Seite 7 von 103) (Englisch)

672850

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

IMPORTANT INFORMATION

Precautions

• Before connecting the AC power cord to the appliance,

make sure the voltage designation of the appliance

corresponds to the local electrical supply. If you are

unsure of your power supply, contact your local power

company. The acceptable power input range is AC

110V–120V~ / 220V–240V~, 50/60Hz.

• The apparatus with CLASS I construction shall be

connected to a MAINS socket outlet with a protective

earthing connection.

• The player is still receiving power from the AC power

source as long as it is connected to the wall outlet,

even if the player itself has been turned off.

• Unplug the power cord if you are not going to use the

product for an extended period of time. Hold the power

plug when unplugging. Do not pull on the cord.

• The main plug is used as the mechanism for cutting off

power, therefore make sure it is easy to unplug.

• To ensure proper ventilation around this product, do not

place this product on a sofa, bed or rug. When installing

this product on a wall or bookshelf, you need to provide

appropriate space: we recommend leaving 4 inches (10

cm) of free space at the top, the sides and the rear.

• High temperature will lead to abnormal operation of this

unit. Do not expose this unit or batteries to direct sunlight

or near other heating objects.

• When moving the player from a cold location to a warm

one, or vice versa, moisture may condense on the laser

pickup unit inside the player. Should this occur, the

player may not operate properly. In such a case please

turn the unit on for 1-2 hours (without a disc) to facilitate

moisture evaporation.

FCC Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Any unauthorized changes or modifications to this equipment would

void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is

subject to th

e following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oppo UDP-205 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info